vmcheckxxx
NAME
vmcheckxxx - Report the media contents of a robotic library
SYNOPSIS
install_path
\Volmgr\bin\vmcheckxxx -rt robot_type -rn robot_number [-rhrobot_host
] [-h EMM_server | volume_database_host] [[-ifinventory_filter_value
] [-if inventory_filter_value] ...] [-full][-list]
DESCRIPTION
Report the media contents of a robotic library and optionally compare its contents with
the volume configuration.
If no options are specified, the media contents of the robot and the volume configuration
are listed along with a list of any mismatches detected.
This command can be executed by any authorized users. For more information about
NetBackup authorization, refer to "Enhanced Authorization and Authentication" in the
NetBackup System Administrator's Guide
or the NetBackup Media Manager SystemAdministrator’s Guide
.OPTIONS
-rt
robot_typeSpecifies the robot type of the robot to inventory.
Valid robot types for NetBackup Enterprise Server follow:
none, acs, odl, tl4, tl8, tld, tlh, tlm, tsh.
Valid robot types for NetBackup Server follow:
none, tl4, tl8, tld.
-rn
robot_numberUnique, logical identification number of the robot to inventory.
-rh
robot_hostName of the host which controls the robot. If no host is specified, the host
where you execute this command is assumed.
-h
EMM_server | volume_database_hostThis option is only applicable for NetBackup Enterprise Server.
The name of the Enterprise Media Manager database host which contains
information about the volumes in a robot. If no host is specified, the
configured EMM server is used by default. For communicating with
vmcheckxxx
pre-NetBackup 6.0 systems not in the EMM domain, this is the EMM
server. If no host is not specified, but a pre-NetBackup 6.0 robotic control
host is specified on the -rh option, the robotic control host will be used as
the EMM server.
-if
inventory_filter_valueThis option is only applicable for NetBackup Enterprise Server.
Specifies inventory filter values. Multiple
-if options may be specified.The inventory filter value is an ACS scratch pool ID, or a TLH volume
category.
The
-if and -full options cannot be specified together.-full
Specifies full inventory. The
-full and -if options cannot be specifiedtogether.
-list
Lists the robot contents.
NOTES
Only limited validation of the option parameters is done.
EXAMPLES
The following command lists the media contents of TLD robot 1 and the volume
configuration for that robot on the host named server2, along with a list of any
mismatches that are detected:
vmcheckxxx -rt tld -rn 1 -rh server2
The following command lists the contents of TLH robot 2 that is connected to the host
where the
vmcheckxxx command was executed:vmcheckxxx -rt tlh -rn 2 -list
SEE ALSO
vmupdate
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Carlson
Sent: Thursday, 27 April 2006 11:26 am
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] how to get a list of tapes in the tape libraryanyone know the console command for getting a list of tapes that are currently in the library? thanks!Dave Carlson
Associate Systems Engineer
atlas®
Partner for Results
206.816.8221 // direct
206.850.8980 // cell
[EMAIL PROTECTED] // email
www.AtlasSolutions.com // web
**********************************************************************
This electronic email and any files transmitted with it are intended
solely for the use of the individual or entity to whom they are addressed.
The views expressed in this message are those of the individual
sender and may not necessarily reflect the views of the Christchurch
City Council.
If you are not the correct recipient of this email please advise the
sender and delete.
Christchurch City Council
http://www.ccc.govt.nz
**********************************************************************