Re: [Veritas-bu] help please

nizar motasim Tue, 05 Dec 2006 22:49:11 -0800

Dear Marianne

you are right last time I used wrong type of tape I changed as you said and this error not come again now I'm working to run test after I insert new media .again many amny thanks for your support ,and son't forget to send me your advice and what's step to let me going well .

Nizar

From: "Marianne Van Den Berg" <[EMAIL PROTECTED]>
To: "nizar motasim" <[EMAIL PROTECTED]>
CC: <veritas-bu@mailman.eng.auburn.edu>
Subject: RE: [Veritas-bu] help please
Date: Tue, 5 Dec 2006 14:11:06 +0200

Hi

Your tape drives are configured as hcart3:

Index DriveName                 DeviceName   Type   Shared   Status
***** *********                 **********   ****   ******   ******
0   HPUltrium3-SCSI0          \\.\Tape0    hcart3 No       UP
        TLD(0) Definition       DRIVE=2

Your Storage Unit is also config'ed as hcart3:

Density:           hcart3 - 1/2 Inch Cartridge 3
Robot Type/Number: TLD / 0

BUT - Here's your problem:

ALL the tapes in your robot are defined as DLT. They should be HCART3.

3000LT DLT      TLD      0       6      -       -     -        AVAILABLE
3001LT DLT      TLD      0       19     -       -     -        AVAILABLE
3002LT DLT      TLD      0       22     -       -     -        AVAILABLE
3003LT DLT      TLD      0       10     -       -     -        AVAILABLE
3004LT DLT      TLD      0       33     -       -     -        AVAILABLE
3005LT DLT      TLD      0       17     -       -     -        AVAILABLE
3006LT DLT      TLD      0       21     -       -     -        AVAILABLE

I don't think you will be able to change the density in the GUI. You will have to delete all the DLT media and add it again. When you do an inventory, go into "Advanced Settings" and either select hcart3 as 'Media Type' under 'Media Settings' or create 'Barcode Rules'. (For more info, see the Media Manager Admin Guide.)

Regards

Marianne

From: nizar motasim [mailto:[EMAIL PROTECTED]
Sent: 05 December 2006 13:45
To: Marianne Van Den Berg
Subject: RE: [Veritas-bu] help please

See this

From: "Marianne Van Den Berg" <[EMAIL PROTECTED]>
To: "nizar motasim" <[EMAIL PROTECTED]>
Subject: RE: [Veritas-bu] help please
Date: Tue, 5 Dec 2006 13:17:54 +0200

Hi

What is the density of your tape drives, media and Storage unit? If there is a mismatch in any one of these, you will get a 96.

If the density of your tape drives are 'hcart2' the density of the media should also be hcart2. The Storage unit must point to the correct robot number on the master/media server and density must also be hcart2. (LTO can be hcart, hcart2 or hcart3. The only thing that's important is that the same density is specified everywhere.)

If you still need help, please send me the output of the following commands. I should be able to help you.

Run these commands from a command window:

.....Veritas\volmgr\bin > tpconfig -d

.....Veritas\volmgr\bin > vmquery -a -bx

.....Veritas\netbackup\bin\admincmd > bpstulist -U

.....Veritas\netbackup\bin\goodies > available_media

Lastly, please tell me which pool name is specified in the policy.

Regards

Marianne

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of nizar motasim
Sent: 05 December 2006 12:34
To: veritas-bu@mailman.eng.auburn.edu
Subject: [Veritas-bu] help please

Dear

I have MSL6000 Library ,and I have 2 drive HPUltrium ,my media is LTO3 800 GB ,I connect these to windows 2000 server and Veritas Netbackup 5.0 .

Veritas see two drive and one robot ,my question is when i need to run any job backup the result is

Media Manager volume Pool

12/5/2006 1:12:47 PM - started process bpbrm (3240)

12/5/2006 1:12:47 PM - connecting

12/5/2006 1:12:48 PM - connected; connect time: 00:00:01

12/5/2006 1:12:48 PM - started process bptm (3664)

12/5/2006 1:12:49 PM - Error bptm(pid=3664) Media Manager volume pool NetBackup has no more unassigned media in robotic device TLD(0)

12/5/2006 1:12:52 PM - end writing

unable to allocate new media for backup, storage unit has none available(96)

12/5/2006 1:12:52 PM - Error bpsched(pid=3468) suspending further backup attempts for client ktm-tower-dc1, policy Activedirectory, schedule Full because it has exceeded the configured number of tries

12/5/2006 1:12:52 PM - Error bpsched(pid=3468) backup of client ktm-tower-dc1 exited with status 96 (unable to allocate new media for backup, storage unit has none available)

Can you please help me because before one week I'm tring without ant result .

TQ

Nizar

Express yourself instantly with MSN Messenger! MSN Messenger Download today it's FREE!

Express yourself instantly with MSN Messenger! MSN Messenger Download today it's FREE!

FREE pop-up blocking with the new MSN Toolbar MSN Toolbar Get it now!

_______________________________________________
Veritas-bu maillist  -  Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

Re: [Veritas-bu] help please

Reply via email to