0n Wed, May 09, 2007 at 07:34:03AM -0700, sauderd wrote: > >I spoke with the network guys in our shop and I got the following: >1. the IOS version is: 12.2, rev. 18 sfx 7 native >2. there is no minumum HW version >3. the hardware we're using is a Catalyst WS-X6748-GE-TX >4. they configured the ports as LCP in active mode > >Being a Unix guys, I haven't the foggiest idea what that means. >But that's the best I can relate their info.
This is all good. Since LACP is set up on the switch ports you now just have to create an EtherChannel via dlam(1m). That will give you link aggregaion on your T2000. -aW IMPORTANT: This email remains the property of the Australian Defence Organisation and is subject to the jurisdiction of section 70 of the CRIMES ACT 1914. If you have received this email in error, you are requested to contact the sender and delete the email. _______________________________________________ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu