I recently added connectivity to a Scalar i2000 with 4 LTO3 drives, to a Solaris 8 server. I removed all the entries in /dev/rmt, reconfigure booted, went through the sg install process, yet the server does not have entries in /dev/rmt for the new drives. The server is connected to two tape libraries: 1-L700 with 6 9840 drives, 2-i2000 with 4 LTO3 drives. The L700 drives continue to be present on the system and usable. I've also tried devfsadm, drvconfig, tapes, etc...
Why don't the entries appear in /dev/rmt? I've done the same process on multiple Solaris 10 servers, connected to the same SAN and they all work fine. cfgadm -o show_FCP_dev -al c8 fc-fabric connected configured unknown c8::500308c00189780a,0 med-changer connected configured unknown c8::500308c00189780a,1 tape connected configured unknown c8::500308c00189780a,2 tape connected configured unknown c9 fc-fabric connected configured unknown c9::500308c00189780b,0 med-changer connected configured unknown c9::500308c00189780b,3 tape connected configured unknown c9::500308c00189780b,4 tape connected configured unknown sgscan /dev/sg/c0tw500308c00189780al0: Changer: "ADIC Scalar i2000" /dev/sg/c0tw500308c00189780al1: Tape (???): "IBM ULTRIUM-TD3" /dev/sg/c0tw500308c00189780al2: Tape (???): "IBM ULTRIUM-TD3" /dev/sg/c0tw500308c00189780bl0: Changer: "ADIC Scalar i2000" /dev/sg/c0tw500308c00189780bl3: Tape (???): "IBM ULTRIUM-TD3" /dev/sg/c0tw500308c00189780bl4: Tape (???): "IBM ULTRIUM-TD3" /dev/sg/c0tw500104f000438becl0: (/dev/rmt/2): "STK 9840" /dev/sg/c0tw500104f00043e256l0: (/dev/rmt/0): "STK 9840" /dev/sg/c0tw500104f00045cbb4l0: (/dev/rmt/1): "STK 9840" /dev/sg/c1tw500104f000438e6el0: (/dev/rmt/3): "STK 9840" /dev/sg/c1tw500104f000438f10l0: (/dev/rmt/4): "STK 9840" /dev/sg/c1tw500104f000480658l0: (/dev/rmt/5): "STK 9840" _______________________________________________ Veritas-bu maillist - [email protected] http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
