Netbackup 5.0MP7 running on Solaris with SL24 Guys i got a bit of weird issue i wondered if anyone could shed some light on.
A customer is changing from an L1000 to an SL24, but wants to have the L1000 configured also for historic restores until they expire. In a test bed on same server hardware (e220r) i have built a fresh OS using Sol9 09/05 (needed mpt driver for new Ultra320 HBA installed), cabled up the SL24 with 2 x LTO3 drives in it. - I installed NBU and patched to MP7 as the existing install is. - Then got the catalogues over and did a bprecover -r -dpath <path to cats> - This recovered everything including the old L1000 storage unit. - I removed the robot and drives using tpconfig, vmadm. - I then configured the new SL24 unit and did an inventory on which brought in the new LTO3 tapes and put them as scratch (as by barcode rules said to do). - I can see all my old media in volume group --- and all my new media in 00_000_TLD - I have left the L1000 storage unit configured in NBU as i want to connect it later, where i will add using correct path etc. - I have changed policies to use the SL24 storage unit Now the problem is when i try and run a backup it is failing with status 96 no media available. I can't understand why as i have new media in which is scratch. Anyone any ideas? Do i need to remove the L1000 storage unit completely? Is something hidden somewhere i need to change? Cheers _______________________________________________ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu