no need to enable compression in the policy, in fact it should not be checked...only in the device name you choose (/dev/rmt/Xcbn)
something changed or you are "sparking the chronic" please post proof of this oersted ramaswamy savi wrote: > Hi ALL, > > We have 2 LTO3 standlone Tape drive connected via SCSI cable in Sunfire-V890 > server and same configured via Netbackup 6.0 MP5. From previous week onwards, > LTO3 tape drive are capable of writing only 400GB, it's not exceeding more > than 400GB. Compression enabled in policy also. Pls provide solution ASAP. We > tested the same in New tape ( HP Ultrium LTO3) also, but still its writing > only 400 GB and throwing an error requesting any new media > > Eailer 700 GB were able to write the data in HP LTO3 drive > > No changes made in configuration file also, so pls provide solution ASAP. > > Tape drive : LTO3 Sun MicroSystem > Tape Model : HP Ultrium LTO3/ 800GB rw > > Regards, > Hemalatha. +---------------------------------------------------------------------- |This was sent by sola...@cablespeed.com via Backup Central. |Forward SPAM to ab...@backupcentral.com. +---------------------------------------------------------------------- _______________________________________________ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu