Hello, Your bigger problem is that netbackup does not support LTO4 with TRU64. Also there is no driver for TRU64 Try to check the read speed of bpbkar to see if the problem is with reading. Check this: http://seer.entsupport.symantec.com/docs/242918.htm it is for windows, but you can convert the command to UNIX.
I suggest to try all, again ALL, tape device files in netbackup configuration. I remember an incident with SDLT and TRU64 without drivers. The automatically selected by netbackup, non rewind, Berkley style device was not enabling drive compression, causing very low backup speed. Trying all devices we found another device that can enable compression. And this device was mend to disable compression. I will ask my customer, if they have add the TRU64 to LTO4 library. They had 10 TRU64 but as TRU64 is end of life they are redraw them. Stefanos -----Original Message----- From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Heathe Yeakley Sent: Tuesday, March 09, 2010 9:12 PM To: Veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Tru64 NetBackup Performance --== Warning: Wall of text incoming ==-- I have a NetBackup environment consisting of: -= Local Site =- 1 Red Hat Linux AS 4 Master running NBU 6.0 MP7 2 Red Hat Linux AS 4 Media Servers running NBU 6.0 MP7 3 Tru64 V5.1B (Rev. 2650) SAN Media running NBU 6.0 MP7 (Mix between O/S patch kit 6 and 7) 1 Spectra Logic T380 with 12 IBM LTO4 drives running latest BlueScale patches and drive firmware. 1 NetApp 1400 VTL running latest firmware. -= DR Site =- 1 Red Hat Linux AS 4 Master running NBU 6.0 MP7 1 Tru64 V5.1B (Rev. 2650) SAN Media running NBU 6.0 MP7 1 Spectra Logic T200 with 12 IBM LTO4 drives running latest BlueScale patches and drive firmware. Last July we replaced our ADIC i2000 library (LTO2 drives) with a Spectra Logic T380. Once we got the library deployed we noticed that our Linux systems are able to write to the library at LTO4 speeds, and the regular network clients even get decent throughput over a 1gb ethernet network. But the 3 Tru64 SAN media servers absolutely crawl. In spite of the fact that I have the SAN media server license installed, I can only get about 10 - 20 MB/s on the policies using the Tru64 storage units. Our main production database sits on a GS1280 (30 CPUS ,114 GB memory), and we have a ES80 attached to another Spectra Logic library at our DR site. Every Sunday morning, I backup an RMAN backup to tape, mail the tapes to my DR site, and restore the RMAN files using a Spectra Logic T200 attached to the ES80, which also has the SAN Media Server software installed. My GS1280 system takes 15-20 hours to backup, but my DR system can restore the same files in 6-7 hours running at 80 - 110 MB/s. I'm completely baffled how the smaller system gets such awesome throughput while my production box plods along at sub-ethernet speeds. I've spent the past several months researching performance and tuning suggestions and I've applied settings 1 at a time when I can get an outage. To speed up testing, we have another GS1280 with 1/2 the CPU and memory as the production system, and it only runs test databases, so it's easier to ask to reboot it if I want to try tuning a particular kernel parm or what not. I installed the SAN media server software on this second 1280 and I've been trying to tune it to NetBackup for the last couple of months. Within NetBackup, I've tuned the Size and Number of data buffers, and it has no visible effect. I've used the hwmgr command to look at the driver and firmware level of just about every piece of equipment on both systems, up to and including the individual busses. The GS1280 has everything the ES80 does, it just has more of it. I've verified HBA drivers on all boxes and all appear to be at the latest firmware. I've asked my SAN guys to double check the zoning, LUN masking, configuration and firmware levels on the SAN switches here and at my DR site to see if there's anything that might be preventing Tru64 from writing to either of my libraries at SAN speeds. They have checked and everything seems to be in order on both SAN environments. Furthermore, I've asked them to look at port utilization on the SAN switches during test backups from the 1280 and they tell me that the HBAs are hardly being utilized. We recently deployed a NetApp VTL, and I was curious if perhaps the VTL got better performance (which would indicate some type of incompatibility between Tru64 and Spectra Logic). There isn't one that I can find. If I setup a test policy to write to the VTL from my test GS1280 and let it write to all 80 virtual drives, no one stream exceeds about 10 - 20 MB/s. Next, I looked at the fragmentation level of the AdvFS domains on both systems. While some are heavily fragmented, the I/O performance on both systems is 100% for every file domain I've checked. The fact that all my clients (Windows, Linux and the handful of Solaris 10) work well with both libraries makes me think that this is something in Tru64. If that's true, then I'm trying to figure out what is set correctly on my DR ES 80 that's jacked up on my local 1280. According to section 1.9 of the Tru64 tuning manual (http://h30097.www3.hp.com/docs/base_doc/DOCUMENTATION/V51B_HTML/ARH9GCTE/TI TLE.HTM) the 5 most commonly tuned kernel subsystems are: vm, ipc, proc, inet, and socket. Furthermore, http://seer.entsupport.symantec.com/docs/235845.htm is a technote advising Tru64 kernel changes for NetBackup. I have examined the values across all my systems. In most cases, the values on both systems meet or exceed tuning suggestions I have found in manufacturer documentation. The two or three values I have tuned so far have had no effect. http://www.scribd.com/doc/19213788/Net-Backup-6 I found this TechNote which recommends setting the sem_mni and sem_msl values to 1,000. sem_msl is currently set to 500 on my local 1280, and I think this is perhaps the only kernel parm I have yet to tune. I'm going to ask for an outage this week to increase this setting to 1,000. If that doesn't work, then I believe I will be officially stumped. I've also watched the EVM channels and the binary error log and haven't seen anything alarming. The tape drives aren't throwing errors and appear to be working fine. This is leading me to believe that there is something not tuned correctly between the Tru64 O/S and the NetBackup client. If it's not in the kernel then I simply don't know where else to look. I'll be posting this to the NetBackup forums on Symantec.com, the ITRC forums on HP.com and the NetBackup mailing list. Can anyone think of any stone I've left unturned? Thanks. _______________________________________________ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu _______________________________________________ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu