On Thu, Jul 08, 2010 at 05:22:48PM -0400, Brandon35 wrote: > > I tried this on my solaris box, all I get is > > ********************* > ****** SDT_TAPE ***** > ********************* > > and nothing...
So it's not currently detecting tape drives on the scsi-compatible busses. I imagine if you tried to run the wizard right now it would say detected 0 drives. > Is there anyway to get this same information on a windows box? The output I showed is comfing from a windows box (the shell was a cygwin bash shell). C:\Program Files\VERITAS\Volmgr\bin\scan -tape (assuming default install location). When I'm having drive detection issues my iterative treatment usually goes something like this: *) swear about MS drive/driver issues *) use HBA utility to verify I can see tape target logged in on FC *) uninstall tape drivers *) reboot *) uninstall tape drivers again to make sure no errors (may need reboot) *) reinstall tape drivers *) verify "device manager" shows what I expect *) verify "scan -tape" shows what I expect *) delete screwed up devices from NBU config *) run device setup wizard to pick drives back up I might only do a subset of that if I'm more certain about what the actual issue is. -- Darren _______________________________________________ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu