Robot arm? Make sure you are NOT putting robotic "control" on the media server. You do zone in the tape drives themselves. The robotic control is done from the master.
-----Original Message----- From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Dennis Peacock Sent: Tuesday, August 20, 2013 2:32 PM To: VERITAS-BU@MAILMAN.ENG.AUBURN.EDU Subject: [Veritas-bu] Converting standard client to a media server Just so we are clear here...... Node_A - Master/Media server Node_B - Client Conversion happens..... Node_A - Master/Media server Node_B - Client/Media server Node_B is zoned so it can see the robot arm and tape drives that are attached to Node_A. +---------------------------------------------------------------------- |This was sent by dpe...@acxiom.com via Backup Central. |Forward SPAM to ab...@backupcentral.com. +---------------------------------------------------------------------- _______________________________________________ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu Athena(r), Created for the Cause(tm) Making a Difference in the Fight Against Breast Cancer --------------------------------- CONFIDENTIALITY NOTICE: This e-mail may contain privileged or confidential information and is for the sole use of the intended recipient(s). If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error, and delete it. Thank you. ---------------------------------- _______________________________________________ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu