Hi Dennis Try to create the volmgr logs under volmgr/debug and put verbose in vm.conf
Sometimes a manually start of ltid from the prompt can give an indication of the problem My guess from what you write is that B and C is communicating properly with the robot Regards Michael > Den 12/11/2013 kl. 02.48 skrev Dennis Peacock <[email protected]>: > > AIX 7.1 boxes. > Node A - Master/Media server with fiber attached LTO-5 library. > Node B - Media server/client with tape drives in the Node-A library zoned so > Node B can see the drives. > > Setup a regular flat file type backup for Node B and tell the policy to use > Node B as the media server. Kick off the backup and the job starts but sits > there "Mounting" for hours. I kill it...cycle Netbackup on both the > client/media server and the Master/Media. I check bp.conf file, I check > tpconfig, I check a bunch of stuff and no such luck. > This is a new setup, master/media server works and runs perfectly. Node B and > Node C work perfectly as long as they are not set to use themselves as the > media server. > > What am I missing? > > +---------------------------------------------------------------------- > |This was sent by [email protected] via Backup Central. > |Forward SPAM to [email protected]. > +---------------------------------------------------------------------- > > > _______________________________________________ > Veritas-bu maillist - [email protected] > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu _______________________________________________ Veritas-bu maillist - [email protected] http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
