thanks Hari. even i got the same input from google as well. as i didn't get any response i have done some testing on my machines. here are my findings.
1. The process doesn't use both the disks (basically reads only) simultaneously when pathtype is not specified (active / active position) (verified using vxdmp stat) 2. i tried to make the both the disks as primary after than it started using both the disks... so which one is working one. active/active or primary/primary.? -----Original Message----- From: [email protected] [mailto: [email protected]] On Behalf Of Hari Vemuri Sent: Tuesday, August 02, 2011 10:25 AM To: [email protected] Subject: Re: [Veritas-vx] pathtype If the pathtype is not specified then its an Active/Active LUN. If the pathtype is specified then its an Active/Passive or Asymmetric Active/Active [ALUA] LUN. All primary paths would be shown with pathtype as 'primary' and same is the case with 'secondary' paths. With regards Hari On Mon, Aug 1, 2011 at 12:03 PM, badlya badlya <[email protected]>wrote: > Hi ALL, > > I have some of the disks with state as enabled but some others (within same > dg) have primary/secondary (first/second path). > > > c3t10d34s2 state=enabled > c6t13d34s2 state=enabled > > So are the above disks in active/active or primary/primary state or else. > > ========= > > c3t14d4s2 state=enabled type=primary > c5t14d4s2 state=enabled type=secondary > >
_______________________________________________ Veritas-vx maillist - [email protected] http://mailman.eng.auburn.edu/mailman/listinfo/veritas-vx
