Tony: Sounds like a good idea to Me. Thanks, Chuck

  ----- Original Message ----- 
  From: Anthony Spezio 
  To: vfb-mail@googlegroups.com 
  Sent: Thursday, January 07, 2010 6:22 AM
  Subject: [VFB] Re: Tiny Fly Question









                Chuck, 
                This may rattle some but here is what I do with plastic beads 
of the right size that have no recess for the bend clearance. I normally have 
to do this for the plastic beads on the WRD. The plastic bead will not go 
around the bend, If I force it it will split. If I use a bigger bead it will 
block the eye. First I flatten the barb then straighten the bend a bit, slide 
the bead around the larger radius then bend the hook back to it's original 
shape. I make it a point not to over bend the hook. It only takes just of bit 
of straightening to get the bead to go around the bend. This is an extra step 
but it works for me.
                Arkansas  Tony

                --- On Wed, 1/6/10, Chuck Alexander <chuckalexan...@hughes.net> 
wrote:


                  From: Chuck Alexander <chuckalexan...@hughes.net>
                  Subject: [flyfishingandflytyingforpanfish] Tiny Fly Question
                  To: "Virtual Fly Box" <vfb-mail@googlegroups.com>, "fly 
fishing for panfish" <flyfishingandflytyingforpanf...@yahoogroups.com>
                  Date: Wednesday, January 6, 2010, 10:43 PM


                    

                  OK all you tiny fly tying experts LOL.. I am stumped with a 
problem.. I took the advice of tying a bigger fly, then working my way down in 
hook sizes till I get to where I want. Problem is, I'm tying (or TRYING) my 
Pink Panfish Producer, and I'm down to a size 20. Problem is, the gold  bead 
for the head. The ones I have are either too small to go around the sharp bend 
in the hook, or they are too big, and they either fall right off the eye end of 
the fly, or get stuck, with the eye buried halfway inside the bead. I have 
tried the beads front wards, backwards and sideways. Is there a secret to 
this??? Should I just make the "gold=bead head" out of gold tying thread, or 
tiny tinsel?? Or do you just not tie flies this small with a bead head on 
them?? Thanks for ANY help, Chuck

                  __._,_.___
                  Reply to sender | Reply to group 
                  Messages in this topic (1) 
                  Recent Activity: 
                  Visit Your Group Start a New Topic 
                  MARKETPLACE
                  Going Green: Your Yahoo! Groups resource for green living
                   Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of 
Use.
                   
                  __,_._,___ 

       




------------------------------------------------------------------------------


  -- 
  You received this message because you are subscribed to the "VFB Mail" group.

  To post to this group, send email to vfb-mail@googlegroups.com
  To unsubscribe from this group, send email to 
vfb-mail-unsubscr...@googlegroups.com
  For more options, visit this group at 
http://groups.google.com/group/vfb-mail?hl=en

  VFB Mail is sponsored by Line's End Inc at http://www.linesend.com


------------------------------------------------------------------------------



  No virus found in this incoming message.
  Checked by AVG - www.avg.com 
  Version: 9.0.725 / Virus Database: 270.14.128/2604 - Release Date: 01/06/10 
13:35:00
-- 
You received this message because you are subscribed to the "VFB Mail" group.

To post to this group, send email to vfb-mail@googlegroups.com
To unsubscribe from this group, send email to 
vfb-mail-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/vfb-mail?hl=en

VFB Mail is sponsored by Line's End Inc at http://www.linesend.com

Reply via email to