"Man, I wish I had the money to attend some of these > shows, cause five minutes in person could be like 5 YEARS of trial and > error," Chuck
Chuck, When you do get to go to a show, make sure you plan it carefully- not just getting there- but being there. There's usually from 50 to 200 or more tiers scheduled for a show- in rotation mostly. You've only got a 6 - 8 hours a day to see what you need to see. Make a list of what/who you want to see. Try to get a tier's schedule beforehand, especially if they list what the tier is specializing in for his/her demos, and the times each day they will be tying. If you bring a video camera, make sure you get permission to video the procedure from management and the tier. Some shows don't allow cameras or video cameras in the building- though that's not too many. Some tiers sell CD's of their procedures, thus don't want videos taken. But if you can and do bring a video camera, usually the tiers who are doing elementary techniques won't mind you videotaping their demo. I've been video'd dozens and dozens of times doing the rope-dub, and have directed 100's to the vfb article for the videos and instruction there. Also, if it's a crowded show, as many of them are, you may not be able to get close enough to the tier to see or hear what they're doing, and both are just as important. This can be frustrating for attendees. The most anticipated tiers will have a crowd waiting at the table even before their tying time, so that has to be dealt with too. I'm just pointing out some of the things I've seen after attending shows for the last 12 years as a demo tier and watcher. Preparation is the key. DonO ----- Original Message ----- From: "Chuck Alexander" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, October 03, 2006 10:46 AM Subject: Re: [VFB] Guderbrod Thread Question > Henk: Thanks for the info.. I guess I just haven't read the right books, or > seen the right video.. Man, I wish I had the money to attend some of these > shows, cause five minutes in person could be like 5 YEARS of trial and > error, Chuck > > ----- Original Message ----- > From: "Henk Verhaar" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Tuesday, October 03, 2006 12:48 AM > Subject: Re: [VFB] Guderbrod Thread Question > > > > On 2 Oct, 2006, at 22:25, Chuck Alexander wrote: > > > I see.. Thanks for the info.. BTW, ppl talk about "splitting" the > > thread... Why would you want to split it??? This must something I am nor > > familiar with... Or forgot (probably the latter), Thanks, Chuck > > YOu know about dubbing loops? You can achieve the same, easier, > quicker and with less bulk by splitting your thread and putting > dubbing between the two halves of the split thread instead of the two > legs of the loop. And you don't need a dubbing loop weight/spinner (a > whorl) to keep the loop closed and twist it, since you have your > bobbin hanging there doing the same thing. THe only advantage of a > loop is that you can make a loop, twist it, then let it hang for > wrapping at a later stage. With a split thread, you have to wrap once > you have inserted and twisted the dubbing (or other material). > > Cheers > > Henk > > =============================== ><(((((º> > =============================== > | Dr. Henk J.M. Verhaar | e-mail: > [EMAIL PROTECTED] | > | Ecotoxicoloog en vliegbinder | tel: 035 656 > 2128 | > | Stichts End 17 | mobiel: 06 26 > 136034 | > | NL-1244 PK Ankeveen | web: www.xs4all.nl/ > ~flyrod | > =============================== <º)))))>< > =============================== > > > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.407 / Virus Database: 268.12.12/461 - Release Date: 10/2/2006 > >
