I used the quickcam express and it works OK. Be careful with the chip number, there are several models. There is a label in the cable. I am using 2.2.18.
Esteban Por favor, responda a [EMAIL PROTECTED] Enviado por: [EMAIL PROTECTED] Destinatarios: [EMAIL PROTECTED] CC: Asunto: [V4L] Logitech QuickCam Express Clasificaci�n: hello: has anyone used the quickcam express successfully? i have loaded and built kernel 2.4.12 with all the relevant usb options selected, built usbutils, and build qce-ga-0.40b. a snippet from lsusb: Bus 001 Device 003: ID 046d:0870 Logitech Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 8 idVendor 0x046d Logitech Inc. idProduct 0x0870 bcdDevice 1.00 iManufacturer 0 iProduct 1 Camera iSerial 0 bNumConfigurations 1 i insmod'd the driver in qce, mod_quickcam.o, and did a "mknod /dev/quick c 180 80". then i ran quickcam which put out this information: Camera ID 0870 HDCS1000-sensor ident: 8 This Quickcam has a HDCS1000 sensor! Sharing memory. Init HDCS1000 sensor SHUTTER 128 START ------ Found Sync 00 00 02, sum 0 *but*, the quickcam box is quite black. ack! any suggestions and/or ideas would be great.... -- regards, allen wayne best, esq "your friendly neighborhood rambler owner" "my rambler will go from 0 to 105" Current date: 53:36:19::294:2001 What we need is either less corruption, or more chance to participate in it. _______________________________________________ Video4linux-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/video4linux-list Http://www.telecom.com.ar _______________________________________________ Video4linux-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/video4linux-list
