Hi,
On Fri, 2002-02-22 at 14:42, rbottoms wrote:
> I have redhat 7.1 and the dc10plus card. I cannot get driver-zoran to
> compile. I am using the latest src from cvs.
>
> I build the source at /usr/local/src/driver-zoran.
>
> I changed the Makefile to find linux src at /usr/src//linux-2.4.2
>
> What follows when I run make is a million errors and the compile fails.
>
> Can someone detail the steps needed to make this package.
>From the site: "Since version 0.5 the driver compiles and works with
2.2.x and 2.4.x kernels. (I used 2.2.14, 2.2.16 and 2.4.0-test6 kernels
for testing). Please, be aware that some Linux distributors supply
modified kernels with their distributions and with such kernels the
driver compilation may fail. Unfortunately, I don't have time and other
resources to keep the driver compatible with every Linux distribution,
therefore, only official Linux kernels from www.kernel.org and its
mirrors will be supported."
Basically, try using a kernel from www.kernel.org.
> Additonally, what exactly should be in the modules.conf file?
my modules.conf (default_norm=0 means default_norm=PAL) for a DC10+:
alias char-major-81-0 zoran
options zoran default_norm=0 lock_norm=0 pass_through=0
pre-install zoran ( /sbin/insmod -f videodev; \
/sbin/insmod -f i2c-old; \
/sbin/insmod -f saa7110; \
/sbin/insmod -f adv7175 )
Ronald
--
- .-.
- /V\ | Ronald Bultje <[EMAIL PROTECTED]>
- // \\ | Running: Linux 2.4.17-XFS and OpenBSD 3.0
- /( )\ | http://ronald.bitfreak.net/
- ^^-^^
_______________________________________________
Video4linux-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/video4linux-list
