Hi,
I've found the following with the Sensoray 311...
PAL works fine except for the first 2 images when the following steps
are carried out.....
1. First set vc[chan].norm = 4; /* 0:PAL 1:NTSC 2:SECAM
*/�recompile then�
2. Then set vc[chan].norm = 5�recompile..then�
3. Set vc[chan].norm = 6�recompile�..then�
4. Set vc[chan].norm = 0 �recompile. Works OK Grabs full colour
PAL.
Then when I reboot the first 2 images I take are rubbish but all
subsequent images are OK. It�s working fine except for the first 2
images.
Also the jumper settings must be correct as follows....supplied by
Charlie...
option 1: J3: | | , with J8 closed ( | ) -- slot 0, and INT
A
option 2: J3: | : , with J7 closed ( | ) -- slot 1, and INT
B
option 3: J3: : | , with J6 closed ( | ) -- slot 2, and INT
C
option 4: J3: : : , with J5 closed ( | ) -- slot 3, and INT
D
I don't understand why I have to carry out steps 1 to 4 above?? Driver
bug?? Any ideas?
Regards,
R.C.
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.408 / Virus Database: 230 - Release Date: 24/10/2002
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@;redhat.com?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/video4linux-list
