Charles Vejnar wrote:
Hello,Since bttv 0.7.93, card with number 27 has changed : from MAXI TV Video PCI2 to Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50.
Yes, Maxi Tv Video PCI 2 is an OEM Flyvideo.
With 0.7.92 all is working with sound. From version 0.7.93 to 0.7.100, I didn't have any sound.
Sound is working fine here: bttv: driver version 0.7.97 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Host bridge is Intel Corp. 430HX - 82439HX TXC [Triton II] bttv: Host bridge needs ETBF enabled. bttv: Bt8xx card found (0). bttv0: Bt878 (rev 2) at 00:12.0, irq: 5, latency: 32, mmio: 0xe4100000 bttv0: detected: FlyVideo 98 (LR50)/ Chronos Video Shuttle II [card=35], PCI subsystem ID is 1851:1850 bttv0: using: BT878(Lifeview FlyVideo 98/ M) [card=27,insmod option] bttv0: enabling ETBF (430FX/VP3 compatibilty) tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc2 bttv0: i2c attach [client=(tuner unset),ok] i2c-core.o: client [(tuner unset)] registered to adapter [bt848 #0](pos. 0). i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: FlyVideo Radio=no RemoteControl=no Tuner=3 gpio=0x1cffff bttv0: FlyVideo LR90=no tda9821/tda9820=no capture_only=no tuner: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF)) bttv0: using tuner=3
I think it's the same problem described by "Annoying hum" :
http://www.wideopen.com/mailing-lists/video4linux-list/msg17542.html
No, that report describes the hum already for bttv-0.7.91. Between 0.7.92 and 0.7.93 the audiomux entries have been corrected, which yould explain changed behaviour. Send relevent "dmesg" output, perhaps your card isn't a Maxi tv PCI 2 at all ? -- video4linux-list mailing list Unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/video4linux-list
