Hi, I had used successfully a Bt848 based card for years, but my new PixelView PlayTV USB Pro does not work with Linux.
console: This is xawtv-3.74, running on Linux/i686 (2.4.20) can't open /dev/video0: No such device v4l2: open /dev/video0: No such device v4l: open /dev/video0: No such device no video grabber device available /var/log/messages: Jan 31 14:54:21 localhost kernel: Linux video capture interface: v1.00 Jan 31 14:54:21 localhost kernel: i2c-core.o: i2c core module Jan 31 14:54:21 localhost kernel: i2c-algo-bit.o: i2c bit algorithm module Jan 31 14:54:21 localhost kernel: bttv: driver version 0.7.96 loaded Jan 31 14:54:21 localhost kernel: bttv: using 4 buffers with 2080k (8320k total) for capture Jan 31 14:54:21 localhost kernel: bttv: Host bridge is VIA Technologies, Inc. VT8363/8365 [KT133/KM133] Jan 31 14:54:21 localhost insmod: /lib/modules/2.4.20/kernel/drivers/media/video/bttv.o: init_module: No such device Jan 31 14:54:21 localhost insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg Jan 31 14:54:21 localhost insmod: /lib/modules/2.4.20/kernel/drivers/media/video/bttv.o: insmod char-major-81-0 failed Jan 31 14:54:21 localhost kernel: i2c-core.o: i2c core module Jan 31 14:54:21 localhost kernel: i2c-algo-bit.o: i2c bit algorithm module Jan 31 14:54:21 localhost kernel: bttv: driver version 0.7.96 loaded Jan 31 14:54:21 localhost kernel: bttv: using 4 buffers with 2080k (8320k total) for capture Jan 31 14:54:21 localhost kernel: bttv: Host bridge is VIA Technologies, Inc. VT8363/8365 [KT133/KM133] Jan 31 14:54:21 localhost insmod: /lib/modules/2.4.20/kernel/drivers/media/video/bttv.o: init_module: No such device Jan 31 14:54:21 localhost insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg Jan 31 14:54:21 localhost insmod: /lib/modules/2.4.20/kernel/drivers/media/video/bttv.o: insmod char-major-81-0 failed /var/log/dmesg: usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 12:23:37 Sep 4 2002 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:07.2 PCI: Sharing IRQ 11 with 00:07.3 PCI: Sharing IRQ 11 with 00:0b.0 usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:07.3 PCI: Sharing IRQ 11 with 00:07.2 PCI: Sharing IRQ 11 with 00:0b.0 usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]> hid-core.c: USB HID support drivers hub.c: USB new device connect on bus1/2, assigned device number 2 usb.c: USB device 2 (vend/prod 0x573/0x4450) is not claimed by any active driver. Thanks for every help in advance. Istvan http://www.ingyennet.hu/~programok_java -- video4linux-list mailing list Unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/video4linux-list
