When i put in 0.7.30 and ran the depmod -a;modprobe bttv cmd it recognized
the card but when i use the webcam script i only get blue signals (thinking
there is no signal) I have checked all cables and that is not the problem.
It is a RCA signal into the 3dfx Desktop TV..
Only thing i can think is when i was using .29 when the computer booted and
i ran the webcam script i would get an error and i would have to kill the
pid and restart the script in order for it to capture correctly. Here is
the dmesg when i get the error and then killing the script and restarting
(with a blue signal):
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.30 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Bt8xx card found (0).
bttv0: Brooktree Bt878 (rev 2) bus: 0, devfn: 72, irq: 10, memory:
0xf4102000.
i2c-algo-bit.o: Adapter: bt848 #0 scl: 1 sda: 1 -- testing...
i2c-algo-bit.o:1 scl: 1 sda: 0
i2c-algo-bit.o:2 scl: 1 sda: 1
i2c-algo-bit.o:3 scl: 0 sda: 1
i2c-algo-bit.o:4 scl: 1 sda: 1
i2c-algo-bit.o: bt848 #0 passed test.
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: model: BT878(Hauppauge new (bt878))
bttv0: Hauppauge msp34xx: reset line init
bttv0: i2c: checking for MSP34xx @ 0x80... not found
i2c-core.o: adapter unregistered: bt848 #0
i2c-algo-bit.o: Adapter: bt848 #0 scl: 1 sda: 1 -- testing...
i2c-algo-bit.o:1 scl: 1 sda: 0
i2c-algo-bit.o:2 scl: 1 sda: 1
i2c-algo-bit.o:3 scl: 0 sda: 1
i2c-algo-bit.o:4 scl: 1 sda: 1
i2c-algo-bit.o: bt848 #0 passed test.
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA8425 @ 0x82... not found
bttv0: i2c: checking for TDA985x @ 0xb6... found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: PLL: 28636363 => 35468950 ... ok
bttv0: PLL: switching off
bttv0: cap vgrab: queue 0 (4:640x480)
bttv0: cap sync: sleep on 0
bttv0: cap irq: capture 0 [start]
bttv0: irq: SCERR risc_count=012c6934
bttv0: irq: SCERR risc_count=012c6934
bttv0: irq: SCERR risc_count=012c6934
bttv0: irq: SCERR risc_count=012c6934
bttv0: irq: SCERR risc_count=012c6934
bttv0: aiee: error loops
bttv0: cap sync: buffer 0, retval -5
bttv0: resetting chip
bttv0: cap vgrab: queue 0 (4:640x480)
bttv0: cap sync: sleep on 0
bttv0: cap irq: capture 0 [start]
bttv0: cap irq: done 0
bttv0: cap sync: buffer 0, retval 0
bttv0: cap vgrab: queue 0 (4:640x480)
bttv0: cap sync: sleep on 0
bttv0: cap irq: capture 0 [start]
bttv0: cap irq: done 0
bttv0: cap sync: buffer 0, retval 0
--
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
