*sigh* yeah, the mixer on the msp34000 was turned all the way
down, sorry.
>
>
> Using 0.7.30 and kwintv 0.7.1
>
> The odd part is, the radio works fine, but I get no sound when
> watching tv. Am i missing something?
>
> loading bttv via "modprobe bttv card=10 radio=1"
>
> All the modules are loaded, everything looks like it's doing the
> right thing. I get a resounding click whenever changing channels in kwintv
> (didn't someone already suggest muting the audio right before changing
> channels?).
>
> Suggestions? I'm lost. The sum total of dmesg output since loading
> the driver is below.
>
> - Eric
>
> Linux video capture interface: v1.00
> i2c-core.o: i2c core module
> i2c-algo-bit.o: i2c bit algorithm module
> bttv: driver version 0.7.30 loaded
> bttv: using 2 buffers with 2080k (4160k total) for capture
> bttv: Bt8xx card found (0).
> bttv0: Brooktree Bt878 (rev 2) bus: 0, devfn: 88, irq: 18, memory:
> 0xef102000.
> i2c-core.o: adapter bt848 #0 registered as adapter 0.
> bttv0: model: BT878(Hauppauge new (bt878))
> bttv0: Hauppauge eeprom: tuner=Philips FM1236 (2)
> bttv0: Hauppauge msp34xx: reset line init
> bttv0: i2c: checking for MSP34xx @ 0x80... found
> i2c-core.o: adapter unregistered: bt848 #0
> i2c-core.o: adapter bt848 #0 registered as adapter 0.
> bttv0: i2c: checking for MSP34xx @ 0x80... found
> i2c-core.o: driver i2c msp3400 driver registered.
> msp3400: init: chip=MSP3430G-A1, has NICAM support
> msp3400: daemon started
> bttv0: i2c attach [MSP3430G-A1]
> i2c-core.o: client [MSP3430G-A1] registered to adapter [bt848 #0](pos. 0).
> bttv0: i2c: checking for TDA8425 @ 0x82... not found
> bttv0: i2c: checking for TDA985x @ 0xb6... not found
> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> i2c-core.o: driver i2c TV tuner driver registered.
> tuner: chip found @ 0x61
> bttv0: i2c attach [Philips NTSC]
> i2c-core.o: client [Philips NTSC] registered to adapter [bt848 #0](pos.
> 1).
> bttv0: PLL: 28636363 => 35468950 ... ok
> bttv0: PLL: switching off
> bttv0: PLL: 28636363 => 35468950 ... ok
> bttv0: PLL: switching off
> i2c-algo-bit.o: bt848 #0 i2c_write: error - bailout.
> msp34xx: I/O error #1 (write 0x10/0x93)
> bttv0: PLL: 28636363 => 35468950 ... ok
> bttv0: PLL: switching off
>
>
> --
> To unsubscribe: mail [EMAIL PROTECTED] with
> "unsubscribe" as the Subject.
>
>
--
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
