Justin,
Thanks! loading kcompat24 worked!
I did install and try modprobe bttv before with no luck, looks like it was
trying to load a joystick port for the emu10k sound card, with mine being a
pure soundblaster (using the sb module) I'm not sure where it pulled the
emu10k stuff from.
# modprobe bttv
/lib/modules/2.2.16/misc/emu10k1-joy.o: init_module: Device or resource busy
Hint: this error can be caused by incorrect module parameters, including
invalid IO or IRQ parameters
/lib/modules/2.2.16/misc/emu10k1-joy.o: insmod
/lib/modules/2.2.16/misc/emu10k1-joy.o failed
/lib/modules/2.2.16/misc/emu10k1-joy.o: insmod bttv failed
#
Thanks again!
-Moses
At 01:06 PM 2/6/01 +0200, you wrote:
>Moses wrote:
>>
>> Hello,
>>
>> Anyone seen this problem with 0.7.54? I'm running current i2c stuff, loaded
>> videodev, i2c, and tuner fine. Bttv just blows up with the following errors
>> without writing anything in dmesg. Been running 0.6.4h fine for over a
>> year, time to upgrade.
>>
>> # insmod bttv
>> Using /lib/modules/2.2.16/misc/bttv.o
>> /lib/modules/2.2.16/misc/bttv.o: unresolved symbol
>> pci_compat_unregister_driver
>> /lib/modules/2.2.16/misc/bttv.o: unresolved symbol
pci_compat_register_driver
>> /lib/modules/2.2.16/misc/bttv.o: unresolved symbol
pci_compat_get_driver_data
>> /lib/modules/2.2.16/misc/bttv.o: unresolved symbol pci_compat_enable_device
>> /lib/modules/2.2.16/misc/bttv.o: unresolved symbol
pci_compat_set_driver_data
>> #
>
>insmod kcompat24.o
>
>Or, better yet, do a "make install" in the bttv directory, and then
>simply "modprobe bttv" will load all the modules you need.
>
>-justin
>
>
>
>_______________________________________________
>Video4linux-list mailing list
>[EMAIL PROTECTED]
>https://listman.redhat.com/mailman/listinfo/video4linux-list
>
_______________________________________________
Video4linux-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/video4linux-list
