Michael,
> There should be no need to set the background to the colour key.
>The drivers blit the colour key into the drawable, respecting whatever
> clipping needs to be done.
By "drivers", you mean the DDX graphics drivers, not the v4l driver, right? I
should be still be able though to use the colour key to place graphics (such as
captions) over the video the video by:
- specifying IncludeInferiors as subwindow mode set in the GC used for
XvPutVideo.
- mapping a window with background colour = key over the video
- drawing graphics in that window with non-key pixel values
Will that work? If not, then it's a shame; the i810 hardware is then not being
used to full advantage.
The i810 does support an off-screen YUV surface; see the code in
/programs/Xserver/hw/xfree86/drivers/i810/i810_video.c. Also, the testxv program
does detect and correctly blt YUV data to that surface, so that part does work.
Thanks for the pointer to xawtv's xvideo, which I can build :-) It fails as
shown below; my test code doesn't fail this way, but doesn't work either :-)
Note that "./xvideo -port 35" (specifying video port) fails the same way.
Peter Kaczowka
--------------------------------------------------
./xvideo -port 34
2 adaptors available.
name: video4linux
type: input video
ports: 1
first: 34
format list
depth=24, visual=33
encoding list for port 34
id=0, name=pal-television, size=768x576
id=1, name=ntsc-television, size=640x480
id=2, name=secam-television, size=768x576
id=3, name=pal-composite1, size=768x576
id=4, name=ntsc-composite1, size=640x480
id=5, name=secam-composite1, size=768x576
id=6, name=pal-svideo, size=768x576
id=7, name=ntsc-svideo, size=640x480
id=8, name=secam-svideo, size=768x576
id=9, name=pal-composite3, size=768x576
id=10, name=ntsc-composite3, size=640x480
id=11, name=secam-composite3, size=768x576
attribute list for port 34
XV_ENCODING get set, -1000 -> 1000, val=0
XV_BRIGHTNESS get set, -1000 -> 1000, val=0
XV_CONTRAST get set, -1000 -> 1000, val=0
XV_SATURATION get set, -1000 -> 1000, val=0
XV_HUE get set, -1000 -> 1000, val=0
XV_MUTE get set, 0 -> 1, val=0
XV_FREQ get set, 0 -> 16000, val=61850
image format list for port 34
name: I810 Video Overlay
type: input image
ports: 1
first: 35
format list
depth=24, visual=33
encoding list for port 35
id=0, name=XV_IMAGE, size=720x576
attribute list for port 35
XV_COLORKEY get set, 0 -> 16777215, val=66046
XV_BRIGHTNESS get set, -128 -> 127, val=0
XV_CONTRAST get set, 0 -> 255, val=64
image format list for port 35
0x32595559 (YUY2) packed
0x32315659 (YV12) planar
0x30323449 (I420) planar
0x59565955 (UYVY) packed
got event: MapNotify (19)
X Error of failed request: XvBadPort
Major opcode of failed request: 142 (XVideo)
Minor opcode of failed request: 11 ()
Serial number of failed request: 59
Current serial number in output stream: 61
Michael wrote:
> On Fri, Feb 16, 2001 at 02:23:35PM -0500, Peter Kaczowka wrote:
> > input card; in this case 34 (see below log output). I specify encoding
> > (XV_ENCODING) 1 - note that it shows up as set in below log output. I
> > set the background color of the window (and verified same with xwd and
> > gimp) to 0x101fe, which is the value of XV_COLOR_KEY, and I assume that
> > pixels with different values would block the video.
>
> There should be no need to set the background to the colour key.
> The drivers blit the colour key into the drawable, respecting whatever
> clipping needs to be done.
>
> > I couldn't get xawtv to configure and recognize Xv so it would support
> > it. Does anyone have a simpler program that tests XvPutVideo?
>
> xawtv does. It's called xvideo. ./xvideo --port 34 should do it given
> your config.
> I'm not sure if it's installed with the debian package, but apt-get
> source should get you a copy.
>
> The other thing to consider is that the v4l module needs support for
> something called 'offscreen surfaces' which are, AFAICT only supported by
> chips, mga, savage and siliconmotion at the moment (I've a patch for
> tdfx) Without that, v4l_drv.o falls back to RGB into the framebuffer, so it'll
> be no different from xawtv -noxv in that respect.
>
> Drivers which support PutImage will do a slower, scalable overlay using the
> 'grabdisplay' option of xawtv. Most should do that because that's the bit
> they did document ;o)
>
> --
> Michael.
>
> _______________________________________________
> Video4linux-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/video4linux-list
_______________________________________________
Video4linux-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/video4linux-list
