Hello all,
A little help from the list for a bttv/WinTV/xawtv newbie please.. :)
OS: Linux
Kernel: 2.4.2
Hardware: Hauppauge WinTV Model 401
Software:
bttv: bttv-0.7.59
bttv: bttv-0.8.11 (I've tried them both)
xawtv: xawtv-3.40
I think that's all the important stuff...
Problem:
I can't get a clear picture or clear audio from xawtv.. If I tune the card to
US, NTSC, Cable ch. 3; I *almost* get a picture. I can tell that something is
there, and that it kinda sorta looks like the talking head on CNN-Headline
News (the channel that my DirecTV receiver is tuned to). I can hear the correct
audio for CNN-HN, mixed with a lot of static, but the audio is there. The video
is 90 - 95% noise.
Any pointers on how to fix this would be greatly appreciated.
What I've tried so far:
Changing the coax feeding the WinTV card.
Multiple insmod options to the bttv drivers.
All of the NTSC frequency charts in the xawtv list.
Verify that my DirecTV receiver is using Ch. 3 as the output channel.
Both of the bttv driver versions listed above.
/var/adm/messages:
Mar 18 17:49:40 fizban kernel: i2c-core.o: i2c core module
Mar 18 17:49:40 fizban kernel: i2c-algo-bit.o: i2c bit algorithm module
Mar 18 17:49:40 fizban kernel: Linux video capture interface: v1.00
Mar 18 17:49:41 fizban kernel: bttv: driver version 0.7.59 loaded
Mar 18 17:49:41 fizban kernel: bttv: using 2 buffers with 2080k (4160k total) fo
r capture
Mar 18 17:49:41 fizban kernel: bttv: Bt8xx card found (0).
Mar 18 17:49:41 fizban kernel: PCI: Found IRQ 10 for device 00:09.0
Mar 18 17:49:41 fizban kernel: PCI: The same IRQ used for device 00:09.1
Mar 18 17:49:41 fizban kernel: bttv0: Bt878 (rev 2) at 00:09.0, irq: 10, latency
: 32, memory: 0xec001000
Mar 18 17:49:41 fizban kernel: bttv0: subsystem: 0070:13eb => Hauppauge WinTV
=> card=10
Mar 18 17:49:41 fizban kernel: bttv0: model: BT878(Hauppauge new (bt878)) [autod
etected]
Mar 18 17:49:41 fizban kernel: bttv0: Hauppauge msp34xx: reset line init
Mar 18 17:49:41 fizban kernel: i2c-core.o: adapter bt848 #0 registered as adapte
r 0.
Mar 18 17:49:41 fizban kernel: bttv0: Hauppauge eeprom: model=62471, tuner=Phili
ps FM1236 (2), radio=yes
Mar 18 17:49:41 fizban kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not fo
und
Mar 18 17:49:41 fizban kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not fo
und
Mar 18 17:49:41 fizban kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not fo
und
Mar 18 17:49:41 fizban kernel: tvaudio: TV audio decoder + audio/video mux drive
r
Mar 18 17:49:41 fizban kernel: tvaudio: known chips: tda9840,tda9873h,tda9850,td
a9855,tea6300,tea6420,tda8425,pic16c54 (PV951)
Mar 18 17:49:41 fizban kernel: i2c-core.o: driver generic i2c audio driver regis
tered.
Mar 18 17:49:41 fizban kernel: bttv0: i2c attach [tda9850]
Mar 18 17:49:41 fizban kernel: i2c-core.o: client [tda9850] registered to adapte
r [bt848 #0](pos. 0).
Mar 18 17:49:41 fizban kernel: i2c-core.o: driver i2c TV tuner driver registered
.
Mar 18 17:49:41 fizban kernel: tuner: chip found @ 0x61
Mar 18 17:49:41 fizban kernel: bttv0: i2c attach [Philips NTSC]
Mar 18 17:49:41 fizban kernel: i2c-core.o: client [Philips NTSC] registered to a
dapter [bt848 #0](pos. 1).
Mar 18 17:49:52 fizban kernel: bttv0: PLL: 28636363 => 35468950 ... ok
Mar 18 17:49:52 fizban kernel: tuner: TV freq (0.-6) out of range (44-890)
Mar 18 18:00:56 fizban kernel: bttv0: PLL: switching off
Mar 18 18:03:45 fizban kernel: bttv0: PLL: 28636363 => 35468950 ... ok
Mar 18 18:03:45 fizban kernel: tuner: TV freq (0.-6) out of range (44-890)
lsmod:
Module Size Used by
tuner 4256 1 (autoclean)
bttv 59760 0
i2c-algo-bit 7264 1 [bttv]
i2c-core 12784 0 [tuner bttv i2c-algo-bit]
videodev 4832 3 [bttv]
parport_pc 10672 1 (autoclean)
lp 5136 1 (autoclean)
parport 15552 1 (autoclean) [parport_pc lp]
sb 7504 0
sb_lib 34784 0 [sb]
uart401 6544 0 [sb_lib]
sound 58768 0 [sb_lib uart401]
soundcore 3952 5 [sb_lib sound]
isa-pnp 28688 0 [sb]
st 27024 0
nls_cp437 4352 3 (autoclean)
vfat 11728 3 (autoclean)
fat 32288 0 (autoclean) [vfat]
That's all the information I can think of to include that sounds useful. Any
other that's needed, just ask. :)
Any ideas anyone?
Much Thanks,
Monte Freeman
Atlanta, GA.
[EMAIL PROTECTED]
_______________________________________________
Video4linux-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/video4linux-list
