On Tuesday, April 10, 2001, at 03:05 PM, Gunther Mayer wrote:
> Eric Jorgensen wrote:
>>
>> Michael Stearne wrote:
>>>
>>> The card is found. But the next problem is that it thinks the card
>>> has
>>> a PAL tuner. Because of that (I think) I only get about an 1/8 of the
> ...
>>> bttv0: subsystem: 0070:13eb => Hauppauge WinTV => card=10
>>> bttv0: model: BT878( *** UNKNOWN *** ) [insmod option]
>
> You override autodetect by giving "card=0" ! Don't do this.
>
> ...
>>> bttv0: i2c attach [Temic PAL (4002 FH5)]
>
> You override autodetect by "tuner=0" ! Don't do this.
>
>
>> Pull the card out, look at the tuner (the metal box), see what
>> it
>> really truly is, then compare that with the list of available tuner
>> types. I forget which exact file that's in insmod-options or CARDLIST.
>> Then force the tuner type on the bttv commandline - as in "modprobe
>> bttv
>> tuner=2" (I have to force tuner=2 for my STB Desktop TV)
>
> Not necessary! Hauppauge tuners are autodetected in bttv (by reading
> eeprom).
> However 0.7.57 lacks some types, then try 0.7.62.
>
>
The card is now detect (consistantly) as a Phillips SECAM and that is
working fine for me. I just can get sound working.
This is what I get after a modprobe bttv
Linux video capture interface: v1.00
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
i2c-core.o: driver i2c msp3400 driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
bttv: driver version 0.7.57 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Host bridge needs ETBF enabled.
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:0f.0, irq: 11, latency: 64, memory:
0xfc5fe000
bttv0: subsystem: 0070:13eb => Hauppauge WinTV => card=10
bttv0: model: BT878(Hauppauge new (bt878)) [autodetected]
bttv0: enabling 430FX/VP3 compatibilty
bttv0: Hauppauge msp34xx: reset line init
msp34xx: init: chip=MSP3435G-B6, has NICAM support
msp3410: daemon started
bttv0: i2c attach [MSP3435G-B6]
i2c-core.o: client [MSP3435G-B6] registered to adapter [bt848 #0](pos.
0).
tuner: chip found @ 0x61
bttv0: i2c attach [Philips SECAM]
i2c-core.o: client [Philips SECAM] registered to adapter [bt848 #0](pos.
1).
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: Hauppauge eeprom: model=44371, tuner=Philips FM1236 (2), radio=yes
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951)
i2c-core.o: driver generic i2c audio driver registered.
Thanks,
Michael
>
> _______________________________________________
> Video4linux-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/video4linux-list
_______________________________________________
Video4linux-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/video4linux-list
