On Sun, 13 May 2001, Gunther Mayer wrote:
>
> > I wrote:
> >
> > ... I'm having no success making v4l/bttv work at all with a Hauppage "WinTV Go"
> WinTV Go Model 603 works fine here.
> What does "dmesg" say when you load your bttv module?
while modprobing:
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
Linux video capture interface: v1.00
bttv: driver version 0.7.63 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Host bridge needs ETBF enabled.
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:11.0, irq: 11, latency: 32, memory: 0xe5001000
bttv0: subsystem: 0070:13eb => Hauppauge WinTV => card=10
bttv0: model: BT878(Hauppauge new (bt878)) [autodetected]
bttv0: enabling ETBF (430FX/VP3 compatibilty)
bttv0: Hauppauge msp34xx: reset line init
i2c-dev.o: Registered 'bt848 #0' as minor 0
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: Hauppauge eeprom: model=44001, tuner=Philips FI1236 MK2 (2), radio=no
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
i2c: initialized
Then, when running xawtv, this repeats at about one "aiee" per second:
bttv0: PLL: 28636363 => 35468950 ... ok
bttv0: irq: SCERR risc_count=03546808
bttv0: irq: SCERR risc_count=03546808
bttv0: irq: SCERR risc_count=03546808
bttv0: irq: SCERR risc_count=03546808
bttv0: irq: SCERR risc_count=03546808
bttv0: aiee: error loops
bttv0: PLL: switching off
bttv0: resetting chip
bttv0: irq: SCERR risc_count=03546808
bttv0: irq: SCERR risc_count=03546808
bttv0: irq: SCERR risc_count=03546808
bttv0: irq: SCERR risc_count=03546808
bttv0: irq: SCERR risc_count=03546808
bttv0: aiee: error loops
Other random info:
- Hauppage "WinTV-Go model 190" board, with Conexant-logo '878 chip
- bttv-0.7.63 driver
- xawtv-3.43
- Redhat 6.2, XFree upgraded to 4.0.2.
- 2.2.19 kernel built from RedHat's upgrade for 6.2,
"kernel-2.2.19-6.2.1.src.rpm" (this kernel rpm comes pre-patched with
(some version of) the "new" i2c driver)
- ABIT ZM6 motherboard, Celeron CPU, Intel 440BX/ZX 82443BX/ZX chipset
- video source is an NTSC composite color camera
Any advice or suggestions would be greatly appreciated!
Steve
--
Steve Tell [EMAIL PROTECTED]
_______________________________________________
Video4linux-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/video4linux-list
