Antoine Sirinelli wrote:
>
> As you maybe have read in my last post, I have problems receiving PAL
> channels. So I tried an old kernel (2.2.17-21mdk) with an old version
> of bttv (0.7.35). With this configuration I can see PAL channels and SECAM
> channels as well.
> With my configuration (kernel 2.4.4 + bttv 0.7.67) I can only see SECAM
> channels.
> Note that my modules.conf is the same in the two cases :
>
> alias char-major-81 bttv
> options tuner type=3
> options bttv pll=1 card=27
>
> I haven't found big differences in the sources for the 'struct tvcard
> bttv_tvcards[]' and the 'static struct tunertype tuners[]'.
>
I kind of had the same problem. I found I had to change my modules.conf
file even though it had worked before. Here's what I ended up doing.
I'm using different settings/card but you should get the jest...
I've shown more than just the bttv stuff just in case.
# bttv
alias char-major-81 videodev
alias char-major-81-0 bttv
pre-install bttv modprobe -k tuner type=2 ; modprobe -k msp3400
options bttv card=10 radio=1
##options tuner type=2 "replace with the pre-install above"
# FM radio
alias char-major-81-64 radio0
# i2c
alias char-major-89 i2c-dev
options i2c-core i2c_debug=1
options i2c-algo-bit bit_test=1
# remote control
# oldname
#alias char-major-61 lirc_driver
# newname
alias char-major-61 lirc_i2c
options tuner debug=1
Hope it helps
Mark
_______________________________________________
Video4linux-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/video4linux-list
