Hi!
I managed to stream a tv channel with ffmpeg but I have a problem. How
can i configure the v4l2 device for a specifig channel/frequency, volume
etc. remotely with some command line tool, without starting for example
tvtime or xawtv?
I tried this:
v4lctl -v 1 setinput Television setnorm PAL setchannel 28 volume mute off
But it doesnt work :(
The output is:
Xvideo: 2 adaptors available.
Xvideo: video4linux: input video, ports 69-69
Xvideo: skipping ports 69-69 (configured other: -1)
Xvideo: ATI Radeon Video Overlay: input image, ports 70-70
Xvideo: no usable video port found
vid-open: trying: v4l2-old...
vid-open: failed: v4l2-old
vid-open: trying: v4l2...
v4l2: open
v4l2: device info:
saa7134 0.2.8 / LifeView FlyVIDEO3000 @ PCI:00:09.0
vid-open: ok: v4l2
freq: reading /usr/local/xawtv-3.85/share/xawtv/Index.map
freq: newtab 5
freq: reading /usr/local/xawtv-3.85/share/xawtv/europe-west.list
freq: reading /usr/local/xawtv-3.85/share/xawtv/ccir-i-iii.list
freq: reading /usr/local/xawtv-3.85/share/xawtv/ccir-sl-sh.list
freq: reading /usr/local/xawtv-3.85/share/xawtv/ccir-h.list
freq: reading /usr/local/xawtv-3.85/share/xawtv/uhf.list
v4l2: tuner cap: STEREO LANG1 LANG2
v4l2: tuner rxs: MONO STEREO LANG1 LANG2
v4l2: tuner cur: STEREO
cmd: "setinput" "Television" "setnorm" "PAL" "setchannel" "28"
"volume" "mute" "off"
v4l2: close
What else should I configure?
If I start tvtime then quit, ffmpeg streams fine.
--
Robert L. RAKSI
-- The Microsoft of Borg: Patches Are Futile! --
--
video4linux-list mailing list
Unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/video4linux-list
