The recording levels, if I remember correctly the two level dials are below the mic routing switches. A common "no sound" error is to have the mic plugged into, say, mic input one while the switches have input two routed to both channels. Or vice versa. It's usually a switches thing.
Brook On Thu, Apr 24, 2008 at 7:23 AM, Heath <[EMAIL PROTECTED]> wrote: > I will have to look at the settings again, I thought it was off, but > I'm not sure, you also mentioned "Levels", what exacatly did you > mean? Sometimes the termanoligy thoughs me... > > Heath > http://batmangeek.com > http://heatharks.com > > --- In videoblogging@yahoogroups.com <videoblogging%40yahoogroups.com>, > "Brook Hinton" <[EMAIL PROTECTED]> > wrote: > > > > > Oh, and I THINK (can't remember) there is a mic pad in the menu if > not in > > the audio routing switches, make sure that is off too. > > > > On Thu, Apr 24, 2008 at 6:50 AM, Brook Hinton <[EMAIL PROTECTED]> wrote: > > > > > I think the Rode is high impedance, so you need more than an > adapter you > > > need an actual impedance matching transformer to get good sound, > but > > > something else is amiss if you are getting NO sound. Have you > tried both mic > > > inputs? The switches are definitely set correctly? Levels are up? > > > Brook > > > > > > > > > On Thu, Apr 24, 2008 at 4:34 AM, Heath <[EMAIL PROTECTED]> wrote: > > > > > >> Yea, and I am getting no sound at all, tried the Mic setting, > the > > >> line in setting, every setting that I can think of, I know it > should > > >> work, but for the life of me I can't figure out why it's not, I > > >> changed batteries, etc...I know it's not an ideal situation but > I was > > >> hoping to put off for another few months having to buy another > mic > > >> for the DVX..... > > >> > > >> > > >> Heath > > >> http://batmangeek.com > > >> http://heathparks.com > > >> > > >> --- In > > >> videoblogging@yahoogroups.com<videoblogging%40yahoogroups.com><videoblogging% > 40yahoogroups.com>, > > > >> Jen Simmons <jensimmons@> > > >> wrote: > > >> > > >> > > > >> > I'm not familiar with The Rode VideoMic. Sounds like it has an > > >> 1/8" > > >> > mini plug? and you have a 1/8 mini to XLR adapter that you are > > >> using > > >> > to plug the mic into the DVX100b?? > > >> > > > >> > It may be a line-level vs. mike level thing. Have you tried > > >> toggling > > >> > the switches on the DVX from mic to line / trying them out? > > >> > > > >> > What kind of result are you getting? ie: a sound with buzzing > in > > >> it? > > >> > or no sound at all? > > >> > > > >> > Jen > > >> > > > >> > > > >> > > > >> > Jen Simmons > > >> > http://jensimmons.com > > >> > > > >> > > > >> > On Apr 23, 2008, at 8:43 PM, Heath wrote: > > >> > > > >> > > I just bought the Panasonic DVX100B and I was hoping to > still be > > >> able > > >> > > to use my Rode VideoMic for the time being and just get an > > >> adapter. > > >> > > Well it does not seem to be working. I know it's not the > adapter > > >> > > because it's works with my handheld microphone. So does > anyone > > >> know > > >> > > about this? Anyone have the Rode and the any camera that has > XLR > > >> > > inputs? Any help is appreciated > > >> > > > > >> > > Heath > > >> > > http://batmangeek.com > > >> > > http://heathparks.com > > >> > > > > >> > > > > >> > > > > >> > > > >> > > > >> > > > >> > [Non-text portions of this message have been removed] > > >> > > > >> > > >> > > >> > > > > > > > > > > > > -- > > > _______________________________________________________ > > > Brook Hinton > > > film/video/audio art > > > www.brookhinton.com > > > studio vlog/blog: www.brookhinton.com/temporalab > > > > > > > > > > > -- > > _______________________________________________________ > > Brook Hinton > > film/video/audio art > > www.brookhinton.com > > studio vlog/blog: www.brookhinton.com/temporalab > > > > > > [Non-text portions of this message have been removed] > > > > > -- _______________________________________________________ Brook Hinton film/video/audio art www.brookhinton.com studio vlog/blog: www.brookhinton.com/temporalab [Non-text portions of this message have been removed]