I just put an Asante card in my SE/30 and upgraded the OS to version 7.1. But when I select Ethertalk it just says it cannot and boots me back to Localtalk.
The Asante Troubleshooter passes the Memory Buffer Test, but fails on the Network Interface Controller Test with "NIC Transmission Failed". My Dell 2716 switch says it autonegotiates at 10M Half Duplex, is that correct for this card? I tried to force it to 10M Full Duplex but it didn't seem to like that either. Maybe tomorrow I'll try putting a dumb switch in between it. I don't have a Hub or I would try that too I guess. The Green lights do come on when it's powered up on the back of the card on the SE/30 and also on the switch... --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
