my Classic's internal 40 meg hard drive did something similar after i attempted to clone it - partition map or whatever its called on Apple, got screwed up to the point where my G3 Blue n White wouldn't recognize it either
i attached it to an Adaptec card in a PC, hit Control-A on startup and did a format via the SCSI card's ROM stuck it back inside the Classic and no more sad mac, partitioned with HDSC and formatted in System 6's Finder i think it would be better if you had partitioned and formatted it on the SE rather than the Power Mac On Sat, Oct 24, 2009 at 5:13 PM, Alex <[email protected]> wrote: > > Hello everybody, > > I recently bought an external hard disk drive 4 GB. I plugged it into > my Power Macintosh G3 and initialized and partitioned it. After having > put all the needed files to perfom an installation, I plugged it into > my Macintosh SE. I turned the drive on, then den Macintosh SE and > suddenly the "dead Mac icon" appeared. > It says: > 0000000F > 00000002 > > This looks like an adress error, but why? The drive within the case is > connected correctly and the SCSI ID is 0. There's no internal SCSI > drive. > > Kind regards, > > -- Alex > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ -~----------~----~----~----~------~----~------~--~---
