--- On Sat, 9/3/11, [email protected] <[email protected]> wrote:

> I just got a vintage Mac SE, and
> would like to copy some software onto
> it from FTP site. How do I go about taking something from a
> modern
> computer and putting it on an older one? Most of the
> tutorials just
> mention changing the Operating System and not how to
> transfer games
> specifically programmed for these vintage computers.

If it's an SE FD/HD (Floppy Drive High Density), then plug a USB floppy drive 
into your newer Mac, pop in a 1.44M Mac formatted disk and copy the files to 
the disk then "sneakernet" the disk to the SE. However, the newest OS X version 
that can *write* to HFS disks is 10.5.x.

If the SE only has an 800K drive then it gets more complicated. You'll need an 
older Mac - older than the iMac - running OS 9 or earlier, to be an 
intermediary.

The reason why is because only internal floppy drives (or externals on the 
models with external drive ports) can read and write the 400K and 800K disks. 
OS X on a beige G3 won't work for this because there's no support for those 
floppy drives, except for a driver for 10.1 that was abandoned before being 
fully finished, and it only supported 1.44M disks.

You'll still need the newer Mac for downloading because there's no up to date 
web browser for "classic" Mac OS and ye olde beige Apples are all painfully 
slow on the internet.

You can skip the floppy transfers if you get a SCSI to Ethernet adapter, but 
for easy direct networking the new Mac has to have 10.5.x or older because 
there's no AppleTalk or AFP support in 10.6 and newer. You can setup a local 
FTP or web server on the newer Mac then download files from that to the old Mac 
or to the "MiddleMac" with the 1.44M floppy drive.

P.S. The newest Mac you can use with low density Mac floppies is the first 
generation Bondi iMac, but you have to solder a connector into the holes in the 
mainboard then run a cable out somewhere to an old Mac floppy drive. Put Mac OS 
8.6 on it and you're ready to go. (OS 9 is not a good choice for working with 
low density Mac floppies.)

-- 
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our 
netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To leave this group, send email to [email protected]
For more options, visit this group at 
http://groups.google.com/group/vintage-macs

Support for older Macs: http://lowendmac.com/services/

Reply via email to