Thanks everyone for your help. I took it apart bad cleaned the laser. Turns
out that that was the problem! It wasn't as hard as I thought.

Again, thanks.

Jake
On Dec 31, 2011 4:16 PM, "Jake Lumpkin" <[email protected]> wrote:

> Well, I put it back together and it still won't read anything. I've tried
> DVDs normal CDs blank CDs, nothing. So as a last ditch effort before I buy
> another overdrive I'm going to clean the laser with a qtip. If there's some
> kinda method if this please let me know. Everyone have a great new years!
>
> Jake
> On Dec 31, 2011 1:46 PM, "Charles Davis" <[email protected]> wrote:
>
>> General inspection (leaking caps.) vacuum out 'dust bunnies', etc.
>>
>> Chuck
>> On Dec 31, 2011, at 10:30 AM, Jake Lumpkin wrote:
>>
>>  Okay, just opened it up and unplugged the cd drive then re inserted it.
>>> Anything else I should do before I put the case back on?
>>>
>>> Jake
>>> On Dec 31, 2011 11:29 AM, "Jake Lumpkin" <[email protected]> wrote:
>>>
>>>  Johnny,
>>>>
>>>> I went into the system profiler and found the cd drive that is installed
>>>> is a DVD-R/DVD-RAM/CD-RW drive. But the only startup disk is the hard
>>>> drive.
>>>>
>>>> Jake
>>>> On Dec 31, 2011 8:51 AM, "Johnny Red" <[email protected]> wrote:
>>>>
>>>>  Best is to open System Info and check what CD/DVD drive is installed.
>>>>>
>>>>> CD/DVD drives do not show up on disk utility unless media is in it.
>>>>>
>>>>> On Dec 31, 2011, at 7:41 AM, Camden wrote:
>>>>>
>>>>>  His drive didn't show up in the disk utility. It is either bad, or a
>>>>>>
>>>>> cable came unseated. I suppose there could be an issue with the
>>>>> motherboard, or disk controller, but let's not think about that.
>>>>>
>>>>>>
>>>>>> On Fri, Dec 30, 2011 at 11:40 PM, Charles Lenington <
>>>>>>
>>>>> [email protected]> wrote:
>>>>>
>>>>>> On 12/31/11 1:14 AM, Dylan McDermond wrote:
>>>>>> On Dec 31, 2011 1:50 AM, "Todd Brayer" <[email protected]
>>>>>> <mailto:[email protected]>> wrote:
>>>>>>
>>>>>>  I never used 10.1, but doesn't it have a Startup Disk thing in the
>>>>>>  control panels that you can use to have it default to starting from
>>>>>>  the system disk? I don't see if you tried that or not.
>>>>>>
>>>>>>
>>>>>>
>>>>>> Open the cd/dvd drive door w/ your finger. copy the computer info
>>>>>> listed
>>>>>>
>>>>>> it will look like
>>>>>>
>>>>>> 700 mhz 40 gig hd 512 meg CDrom
>>>>>>                        dvd
>>>>>>                        Combo
>>>>>>
>>>>>> what I'm looking for is the last item above. If you have a cdrom drive
>>>>>>
>>>>> a dvd won't work in it. The early eMacs shipped w/ cdroms.
>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> -----
>>>>>> You received this message because you are a member of the Vintage Macs
>>>>>>
>>>>> group.
>>>>>
>>>>>> The list FAQ is at 
>>>>>> http://lowendmac.com/lists/**vintagemacs.shtml<http://lowendmac.com/lists/vintagemacs.shtml>and
>>>>>>
>>>>> our netiquette guide is at
>>>>> http://www.lowendmac.com/**lists/netiquette.shtml<http://www.lowendmac.com/lists/netiquette.shtml>
>>>>>
>>>>>> To post to this group, send email to [email protected]
>>>>>> To leave this group, send email to
>>>>>>
>>>>> vintage-macs+unsubscribe@**googlegroups.com<vintage-macs%[email protected]>
>>>>>
>>>>>> For more options, visit this group at
>>>>>>
>>>>> http://groups.google.com/**group/vintage-macs<http://groups.google.com/group/vintage-macs>
>>>>>
>>>>>>
>>>>>> Support for older Macs: http://lowendmac.com/services/
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Sincerely:
>>>>>> Camden Stensland, A+ Technician, CCNA, MCP
>>>>>> .CAM Computer Services
>>>>>> Founder/President/Technician
>>>>>> Ph: 206.769.4585
>>>>>> Alt: 206.632.4176
>>>>>> [email protected]
>>>>>>
>>>>>>
>>>>>> --
>>>>>> -----
>>>>>> You received this message because you are a member of the Vintage Macs
>>>>>>
>>>>> group.
>>>>>
>>>>>> The list FAQ is at 
>>>>>> http://lowendmac.com/lists/**vintagemacs.shtml<http://lowendmac.com/lists/vintagemacs.shtml>and
>>>>>>
>>>>> our netiquette guide is at
>>>>> http://www.lowendmac.com/**lists/netiquette.shtml<http://www.lowendmac.com/lists/netiquette.shtml>
>>>>>
>>>>>> To post to this group, send email to [email protected]
>>>>>> To leave this group, send email to
>>>>>>
>>>>> vintage-macs+unsubscribe@**googlegroups.com<vintage-macs%[email protected]>
>>>>>
>>>>>> For more options, visit this group at
>>>>>>
>>>>> http://groups.google.com/**group/vintage-macs<http://groups.google.com/group/vintage-macs>
>>>>>
>>>>>>
>>>>>> Support for older Macs: http://lowendmac.com/services/
>>>>>>
>>>>>
>>>>> --
>>>>> -----
>>>>> You received this message because you are a member of the Vintage Macs
>>>>> group.
>>>>> The list FAQ is at 
>>>>> http://lowendmac.com/lists/**vintagemacs.shtml<http://lowendmac.com/lists/vintagemacs.shtml>and
>>>>>  our
>>>>> netiquette guide is at http://www.lowendmac.com/**
>>>>> lists/netiquette.shtml<http://www.lowendmac.com/lists/netiquette.shtml>
>>>>> To post to this group, send email to [email protected]
>>>>> To leave this group, send email to
>>>>> vintage-macs+unsubscribe@**googlegroups.com<vintage-macs%[email protected]>
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/**group/vintage-macs<http://groups.google.com/group/vintage-macs>
>>>>>
>>>>> Support for older Macs: http://lowendmac.com/services/
>>>>>
>>>>
>>>>
>>>>
>>> --
>>> -----
>>> You received this message because you are a member of the Vintage Macs
>>> group.
>>> The list FAQ is at 
>>> http://lowendmac.com/lists/**vintagemacs.shtml<http://lowendmac.com/lists/vintagemacs.shtml>and
>>>  our netiquette guide is at
>>> http://www.lowendmac.com/**lists/netiquette.shtml<http://www.lowendmac.com/lists/netiquette.shtml>
>>> To post to this group, send email to [email protected]
>>> To leave this group, send email to vintage-macs+unsubscribe@**
>>> googlegroups.com <vintage-macs%[email protected]>
>>> For more options, visit this group at http://groups.google.com/**
>>> group/vintage-macs <http://groups.google.com/group/vintage-macs>
>>>
>>> Support for older Macs: http://lowendmac.com/services/
>>>
>>
>> --
>> -----
>> You received this message because you are a member of the Vintage Macs
>> group.
>> The list FAQ is at 
>> http://lowendmac.com/lists/**vintagemacs.shtml<http://lowendmac.com/lists/vintagemacs.shtml>and
>>  our netiquette guide is at
>> http://www.lowendmac.com/**lists/netiquette.shtml<http://www.lowendmac.com/lists/netiquette.shtml>
>> To post to this group, send email to [email protected]
>> To leave this group, send email to vintage-macs+unsubscribe@**
>> googlegroups.com <vintage-macs%[email protected]>
>> For more options, visit this group at http://groups.google.com/**
>> group/vintage-macs <http://groups.google.com/group/vintage-macs>
>>
>> Support for older Macs: http://lowendmac.com/services/
>
>

-- 
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our 
netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To leave this group, send email to [email protected]
For more options, visit this group at 
http://groups.google.com/group/vintage-macs

Support for older Macs: http://lowendmac.com/services/

Reply via email to