On Jul 27, 2013, at 5:58 PM, Jonathan Morton wrote: > > On 28 Jul, 2013, at 3:22 am, Yuriy Oliynyk wrote: > >> I have a client that is running a machine shop. He's got some old Bridgeport >> Mills in there that are controlled with Macintosh IIcx. Recently his >> Macintosh had died and I was lucky to find a working replacement for it. >> However I would still need few more machines for backup. So if you have a >> working IIcx or a working motherboard replacement for it I would gladly buy >> it at a reasonable price. > I use a Quadra 650 in my CNC shop and a PowerBook 190, I bet these will do what he's running on the IIcx, Any later models will not run the software that these do plus there is a communication problem over 7.5.
John Carmonne Yorba Linda CA 92886 USA MacPro 2.66 Quad Nehalem -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
