I would also do a PRAM reset since you've made a hardware change. > ------ Original Message ------ > From: "Christian Brodermann" <cmbroderman...@gmail.com> > To: vintage-macs@googlegroups.com > Sent: 7/16/2014 8:49:47 PM > Subject: Re: Performa 630CD Info > > > Welp. Got my Mac working well, then I get my 64MB stick of RAM, install it, > and it immediately stops displaying anything on the monitor while using the > same exact settings on my adapter I had used when it had the 32MB stick. > > I went back to the original RAM, and it still doesn't work, and I've tried > pretty much every combination for every display and still nothing. > > I'm wondering what's going on. >
-- [Greg Bennett] -Independent Carpenter, Electrician & Lighting Designer -Purveyor of Classic Apple & Macintosh Gear http://www.hsiprodsvcs.com/ http://www.macshack.us/ -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to vintage-macs@googlegroups.com To leave this group, send email to vintage-macs+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
