> On Oct 27, 2014, at 8:46 AM, fa...@gottick.com wrote: > > Have a SE FDHD that starts up fine but all i get on the screen is a bright > horizontal line. About a milimeter wide. Any suggestions on this?
You can try refreshing the solder on the yoke connector on the Analog board. A quick test would be to knock on the left side of the Mac. if the screen freaks out, just resolder those connections. There’s an outside chance it could be the chip at U2 on the analog board. If that’s the case, you’ll need to find a suitable replacement. Try refreshing the solder on the yoke connection first. - Dylan -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to vintage-macs@googlegroups.com To leave this group, send email to vintage-macs+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.