Tried a PRAM zap? Hold Command, Option, P and R simultaneously then turn the Mac on. You should get the startup bong. Keep holding the keys until it bongs a second time.
On Sunday, April 9, 2017, 4:11:40 AM MDT, Robert Riggs <rrigg...@gmail.com> wrote:William I have gone as far as removing all drives that where installed, floppy, CDROM and hard drive. Even with all drives disconnected it still goes to the grey desktop I described. On Sunday, April 9, 2017 at 7:32:32 AM UTC-5, william bowles wrote: Hi Robert To me that says that the Mac has booted but the termination on the scsi hdd is not correct and it can not find the folders to load the system. Do you have more than one hdd installed and have you checked the termination id on each drive to see if there is a conflict because if both or more hdd have the same id then what you currently have is what you get when trying to load the Mac . -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to vintage-macs@googlegroups.com To leave this group, send email to vintage-macs+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
