I just wanted to post back that it worked! And here's how it happened. After taking the drive apart and unsticking it. I set the jumper on A1. Then I put it into an applecd150 enclosure and connected to my iici. Then I used alliance power tools 2.7.3 and formatted the drive. Then shutdown and turned it back on. Then I used the patched Apple HD sc setup 7.3.5 to initialize the drive. After that...it worked!!!!
Jonathan I couldn't have done it without you! You rule!!!! -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to vintage-macs@googlegroups.com To leave this group, send email to vintage-macs+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.