I know this subject has come up from time to time and I don't know if any one was able to answer it. I just set up a IIsi with two Ethernet cards and both work. I didn't try routing but I did configure one for AppleTalk and one for TCP/IP, both connected to the same physical network. It works fine. According to MacEnvy one shows up in slot 9 and the other in slot B. The AppleTalk control panel reports them roughly that way (Ethernet Slot 9 and Ethernet Slot 11).
This is under OS 7.6.1 and OT 1.1.2. I had to dig around inside a IIsi any ways and thought I'd satisfy my own curiosity. -- Clark Martin Redwood City, CA, USA Macintosh / Internet Consulting [EMAIL PROTECTED] "I'm a designated driver on the Information Super Highway" -- Vintage Macs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> Vintage Macs list info: <http://lowendmac.com/lists/vintagemacs.shtml> The FAQ: <http://macfaq.org/> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/vintage.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
