there are two numbers present on what seems to be the chipset - lc20028 and 4l02f2664
i'm using a test, working, non-crossover cable and am using no special drives. the ethernet option does show up under tcp ip
Darren wrote:
Gregg Eshelman wrote:
--- Adam& Cora Dietrick <[EMAIL PROTECTED]>
wrote:
I got the card in and the mac acknowledges that i
now have an ethernet card. However, on my 10/100 hub there is nothing
lit up to acknowledge that the mac is there.
Fiddling with the software will get you nowhere until you have a lit up Link light for the port the Mac is connected to.
Interesting, there's a 5500 and a 7220 here that wont light up a thing without the correct driver which also means no conflicts. While simply unplugging the cable from another machine and testing the mac with that should rule out a cable problem. Aren't Uplink ports usually marked well enough?
Without knowing if ethernet is an option in any of the control panels I dont see how you can go past software -
the mac acknowledges that i now have an ethernet
- doesn't mean very much to me, once we had the brand and model of the nic and therefore know what driver may or not be needed. I figured you'd nut out the hardware from there. :)
-- Vintage Macs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
Vintage Macs list info: <http://lowendmac.com/lists/vintagemacs.shtml> --> AOL users, remove "mailto:" Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/vintage.macs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com