Nick,
I'm not certain of the configuration of your unit however, I found that in removing
my black water tank, I had to take out the closet wall, sofa, toilet, and belly pan
in order to get the tank out.
My new tank should arrive today or tomorrow and then its time to put it back
together. I don't have a gray water tank so I am also adding a 2 inch slide valve in
order to stop backwash when flushing the black water tank with my new Sewer Solution
device since the belly pan is off. I also found some rot in the back of the Caravel
that I was able to repair while under there.
Pete
'65 Caravel
Jim Dunmyer wrote:
> Nick,
> You must remove the toilet to remove the holding tank. The flange is
> attached to the tank, and the toilet is bolted to the flange.
>
> <<Jim>>
>
> Nick Novia wrote:
> >
> >
> >
> > It looks easy enough, but looks are deceiving and I know the toilet complicates
> > the removal of the tank, I'm thinking the toilet will have to be removed also,
> > I don't know what else.
> >
> >
> --
>
> <<http://www.oldengine.org/members/jdunmyer>>
> <<[EMAIL PROTECTED]>>
> <<lower SE Michigan, USA>>
> <<mailto:[EMAIL PROTECTED]>>
