At 11:09 AM 6/11/00 -0400, Tim Cook wrote:
>Chris,
>thanks for the info. I assume by separating the halves, I can get to it by
>dropping the belly pan in that area and get at it that way? My version
>comes down vertically from the holding tank and just hangs under the
>trailer. The valve I have is the plastic version I would say, I looked up
>in there and it is all plastic as far as I can tell. If you could get the
>part numbers and an approximate cost I would really appreciate it..
>Thanks again
>Tim
I finally got around to it. The kit for the all plastic valve is Thetford
p/n 09872 - around $16.00. For the Stainless steel back valve it is p/n
03872- around $36.00. The p/n for the blade- which if I was going to all
the work of rebuilding the valve, I would replace, also, is p/n 01435 about
$10.00.
I'm pretty sure that Thetford will sell direct- you can call them at
1-800-521-3032, or e-mail at mailto:[EMAIL PROTECTED] .
________
Chris Bryant
Bryant RV Services
DeLand, Florida
mailto:[EMAIL PROTECTED]
