Hi Brian, To pull the ceiling panel, you will need to remove the two forward light fixtures and the A/C cover. There are several rivets holding in the center overhead panel, you will need to drill them out. I replaced them with sheet metal screws with white heads so they would blend in. Then start from the forward end and work the ceiling panel off, but not off completely, off just enought to get your work done and button it back up again. good luck, Olly Larson 99 Durango and 73 Safari
- [VAC] Newbie Kathy Hunt
- [VAC] Newbie B W Ganoe
- Re: [VAC] Newbie Richard A. Larson
- Re: [VAC] Newbie brian ganoe
- Re: [VAC] Newbie Richard A. Larson
- Re: [VAC] Newbie B W Ganoe
- Re: [VAC] Newbie Philip Piper
- Re: [VAC] Newbie terry tyler
- Re: [VAC] Newbie Brian Ganoe
- Re: [VAC] Newbie terry tyler
- Re: [VAC] Newbie B W Ganoe
- Re: [VAC] Newbie terry tyler
- Re: [VAC] Newbie brian ganoe
- Re: [VAC] Newbie Jim Dunmyer
- Re: [VAC] Newbie brian ganoe
