Thanks, I got it in successfully. take care. Sent from my iPhone
On Aug 22, 2012, at 9:38 AM, "Raul A. Gallegos" <r...@raulgallegos.com> wrote: > Hi, ok then. Try the following. > > 1. The case should have a hard rubber outer shell around it. You can remove > this by pulling it out from the body of the case itself. There is no real > right or wrong way. Just pull it off. You can make things easier by pulling > it out from the small clamps on the two sides of the case on both the left > and right side just at the middle. Then pull it back from the top and bottom. > > 2. Once you have the hard outer rubber shell removed, you have the inner > plastic shell. This comes apart so that there is a front and back piece. > There are clamps keeping it together on the middle left and right, and one at > the top. Using your fingernails, carefully open the two parts apart and then > the shell will open. Now, make sure your phone is clean and dry before you > put it in. What I usually do is lay the front piece face down, and place the > phone in it also face down. Slide the bottom of the phone in first. It will > only fit one way. Remember that the front shell part of the case is the one > with the clear screen protector and the dots on it. > > 3. Once the phone is firmly in place in the front shell piece, place the back > piece and make sure it clamps shut together on the top and sides. Check the > bottom too to make sure everything is fitting nice and snug. > > 4. replace the hard rubber outer shell as it was before. You will have to > make sure and smooth out the top and middle sides where the clamps of the > inner plastic shell are. > > That's all there is to it. > > I hope this helps. > > -- > Raul A. Gallegos > Ever notice how it's usually the person with the closed mind who has the open > mouth? > Home Page: http://raulgallegos.com > Twitter: https://twitter.com/rau47 > Facebook: http://facebook.com/rau47 > > On 8/22/2012 9:14 AM, Melissa Tucker wrote: >> the one you are describing is correct. >> >> Sent from my iPhone >> >> On Aug 22, 2012, at 8:16 AM, "Raul A. Gallegos" <r...@raulgallegos.com> >> wrote: >> >>> Hello Melissa. I am assuming that maybe you got the OtterBox defender case. >>> If it is the one which comes with a belt clip holster along with the case >>> itself, then I am correct. Just in case it is not however, let us know so >>> we can try to help you further. >>> >>> --- >>> Raul A. Gallegos >>> Facebook, Twitter, and Zello username: rau47 >>> Homepage: http://RaulGallegos.com >>> >>> On Aug 22, 2012, at 8:09 AM, Melissa Tucker <melissatuck...@att.net> wrote: >>> >>>> I ordered the iphone 4s case from speed dots and can't figure out how to >>>> open the case so I can get the phone in it. It's the case that has the >>>> dots on it so I can use the screen better. >>>> >>>> Sent from my iPhone >>>> >>>> -- >>>> You received this message because you are subscribed to the "VIPhone" >>>> Google Group. >>>> To search the VIPhone public archive, visit >>>> http://www.mail-archive.com/viphone@googlegroups.com/. >>>> To post to this group, send email to viphone@googlegroups.com. >>>> To unsubscribe from this group, send email to >>>> viphone+unsubscr...@googlegroups.com. >>>> For more options, visit this group at >>>> http://groups.google.com/group/viphone?hl=en. >>>> >>>> >>> >>> -- >>> You received this message because you are subscribed to the "VIPhone" >>> Google Group. >>> To search the VIPhone public archive, visit >>> http://www.mail-archive.com/viphone@googlegroups.com/. >>> To post to this group, send email to viphone@googlegroups.com. >>> To unsubscribe from this group, send email to >>> viphone+unsubscr...@googlegroups.com. >>> For more options, visit this group at >>> http://groups.google.com/group/viphone?hl=en. >>> >>> >> > > -- > You received this message because you are subscribed to the "VIPhone" Google > Group. > To search the VIPhone public archive, visit > http://www.mail-archive.com/viphone@googlegroups.com/. > To post to this group, send email to viphone@googlegroups.com. > To unsubscribe from this group, send email to > viphone+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/viphone?hl=en. > > -- You received this message because you are subscribed to the "VIPhone" Google Group. To search the VIPhone public archive, visit http://www.mail-archive.com/viphone@googlegroups.com/. To post to this group, send email to viphone@googlegroups.com. To unsubscribe from this group, send email to viphone+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/viphone?hl=en.
