I am trying to define a network tht just bridges the traffic between the
virtual machine network and the LAN attached to eth0
No dnsmasq/dhcp as it is difficult to impossible to tie dnsmasq to the
master ISC servers on the LAN.
It should forward/receive packets like a standard hardware bridge
The virtual guests should get their addressing from the dhcp server on the
LAN and DNS from the server as well.
with the following I can not get dhcp discover reply from the LAN server,
nor can I manually code the IP/gateway/DNS and ping the hard address
(172.30.2.33) can anyone tell me what I am missing? Vhost and vguest are
both CENTOS7
======================
<networkstatus>
<class_id bitmap='0-2'/>
<floor sum='0'/>
<network>
<name>plain</name>
<uuid>31f78c2c-257d-4c57-82e5-0c53deadbeef</uuid>
<forward mode='bridge'/>
<bridge name='virbr1' />
<mac address='52:54:00:b1:34:77'/>
<domain name='plain'/>
<ip address='172.30.2.1' netmask='255.255.255.0'>
<dhcp relay='yes'/>
<dhcp enable='no' relay='yes'/>
<!--
The relay will not be started if the "enable" property is 'no':
-->
</ip>
</network>
</networkstatus>
===========================
A routed environment would be acceptable, but bridged is better as it
should not be required to change my routing on the gateway router
TIA,
Bob
_______________________________________________
virt mailing list
virt@lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/virt
