Support for 2d mode (3d/virgl mode is not covered by this patch) has
been added to the linux kernel version 4.2 and to qemu version 2.4.
Cc: Laszlo Ersek <ler...@redhat.com>
Signed-off-by: Gerd Hoffmann <kra...@redhat.com>
---
content.tex | 2 +
virtio-gpu.tex | 481 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 483 insertions(+)
create mode 100644 virtio-gpu.tex
diff --git a/content.tex b/content.tex
index be1823431d..d41c2f8d76 100644
--- a/content.tex
+++ b/content.tex
@@ -5325,6 +5325,8 @@ descriptor for the \field{sense_len}, \field{residual},
\field{status_qualifier}, \field{status}, \field{response} and
\field{sense} fields.
+\input{virtio-gpu.tex}
+
\chapter{Reserved Feature Bits}\label{sec:Reserved Feature Bits}
Currently these device-independent feature bits defined:
diff --git a/virtio-gpu.tex b/virtio-gpu.tex
new file mode 100644
index 0000000000..5d4709ad30
--- /dev/null
+++ b/virtio-gpu.tex
@@ -0,0 +1,481 @@
+\section{GPU Device}\label{sec:Device Types / GPU Device}
+
+virtio-gpu is a virtio based graphics adapter. It can operate in 2D
+mode and in 3D (virgl) mode. 3D mode will offload rendering ops to
+the host gpu and therefore requires a gpu with 3D support on the host
+machine.
+
+3D mode is not covered (yet) in this specification, even though it is
+mentioned here and there due to some details of the virtual hardware
+being designed with 3D mode in mind.
+
+In 2D mode the virtio-gpu device provides support for ARGB Hardware
+cursors and multiple scanouts (aka heads).
+
+\subsection{Device ID}\label{sec:Device Types / GPU Device / Device ID}
+
+16
+
+\subsection{Virtqueues}\label{sec:Device Types / GPU Device / Virtqueues}
+
+\begin{description}
+\item[0] controlq - queue for sending control commands
+\item[1] cursorq - queue for sending cursor updates
+\end{description}
+
+Both queues have the same format. Each request and each response have
+a fixed header, followed by command specific data fields. The
+separate cursor queue is the "fast track" for cursor commands
+(VIRTIO_GPU_CMD_UPDATE_CURSOR and VIRTIO_GPU_CMD_MOVE_CURSOR), so they
+go though without being delayed by time-consuming commands in the
+control queue.
+
+\subsection{Feature bits}\label{sec:Device Types / GPU Device / Feature bits}
+
+\begin{description}
+\item[VIRTIO_GPU_F_VIRGL (0)] virgl 3D mode is supported.
+\end{description}
+
+\subsection{Device configuration layout}\label{sec:Device Types / GPU Device /
Device configuration layout}
+
+\begin{lstlisting}
+#define VIRTIO_GPU_EVENT_DISPLAY (1 << 0)
+
+struct virtio_gpu_config {
+ le32 events_read;
+ le32 events_clear;
+ le32 num_scanouts;
+ le32 reserved;
+}
+\end{lstlisting}
+
+\subsubsection{Device configuration fields}
+
+\begin{description}
+\item[\field{events_read}] signals pending events to the driver. The
+ driver MUST NOT write to this field.
+\item[\field{events_clear}] clears pending events in the device.
+ Writing a '1' into a bit will clear the corresponding bit in
+ \field{events_read}, mimicking write-to-clear behavior.
+\item[\field{num_scanouts}] specifies the maximum number of scanouts
+ supported by the device. Minimum value is 1, maximum value is 16.
+\end{description}
+
+\subsubsection{Events}
+
+\begin{description}
+\item[VIRTIO_GPU_EVENT_DISPLAY] Display configuration has changed.
+ The driver SHOULD use the VIRTIO_GPU_CMD_GET_DISPLAY_INFO command to
+ fetch the information from the device.
+\end{description}
+
+\devicenormative{\subsection}{Device Initialization}{Device Types / GPU Device
/ Device Initialization}
+
+The driver SHOULD query the display information from the device using
+the VIRTIO_GPU_CMD_GET_DISPLAY_INFO command and use that information
+for the initial scanout setup. In case no information is available or
+all displays are disabled the driver MAY choose to use a fallback,
+such as 1024x768 at display 0.
+
+\subsection{Device Operation}\label{sec:Device Types / GPU Device / Device
Operation}
+
+The virtio-gpu is based around the concept of resources private to the
+host, the guest must DMA transfer into these resources. This is a
+design requirement in order to interface with future 3D rendering. In
+the unaccelerated 2D mode there is no support for DMA transfers from
+resources, just to them.
+
+Resources are initially simple 2D resources, consisting of a width,
+height and format along with an identifier. The guest must then attach
+backing store to the resources in order for DMA transfers to
+work. This is like a GART in a real GPU.
+
+\subsubsection{Device Operation: Create a framebuffer and configure scanout}
+
+\begin{itemize*}
+\item Create a host resource using VIRTIO_GPU_CMD_RESOURCE_CREATE_2D.
+\item Allocate a framebuffer from guest ram, and attach it as backing
+ storage to the resource just created, using
+ VIRTIO_GPU_CMD_RESOURCE_ATTACH_BACKING. Scatter lists are
+ supported, so the framebuffer doesn't need to be contignous in guest
+ physical memory.
+\item Use VIRTIO_GPU_CMD_SET_SCANOUT to link the framebuffer to
+ a display scanout.
+\end{itemize*}
+
+\subsubsection{Device Operation: Update a framebuffer and scanout}
+
+\begin{itemize*}
+\item Render to your framebuffer memory.
+\item Use VIRTIO_GPU_CMD_TRANSFER_TO_HOST_2D to update the host resource
+ from guest memory.
+\item Use VIRTIO_GPU_CMD_RESOURCE_FLUSH to flush the updated resource
+ to the display.
+\end{itemize*}
+
+\subsubsection{Device Operation: Using pageflip}
+
+It is possible to create multiple framebuffers, flip between them
+using VIRTIO_GPU_CMD_SET_SCANOUT and VIRTIO_GPU_CMD_RESOURCE_FLUSH,
+and update the invisible framebuffer using
+VIRTIO_GPU_CMD_TRANSFER_TO_HOST_2D.
+
+\subsubsection{Device Operation: Multihead setup}
+
+In case two or more displays are present there are different ways to
+configure things:
+
+\begin{itemize*}
+\item Create a single framebuffer, link it to all displays
+ (mirroring).
+\item Create an framebuffer for each display.
+\item Create one big framebuffer, configure scanouts to display a
+ different rectangle of that framebuffer each.
+\end{itemize*}
+
+\devicenormative{\subsubsection}{Device Operation: Command lifecycle and
fencing}{Device Types / GPU Device / Device Operation / Device Operation:
Command lifecycle and fencing}
+
+The device MAY process controlq commands asyncronously and return them
+to the driver before the processing is complete. If the driver needs
+to know when the processing is finished it can set the
+VIRTIO_GPU_FLAG_FENCE flag in the request. The device MUST finish the
+processing before returning the command then.
+
+Note: current qemu implementation does asyncrounous processing only in
+3d mode, when offloading the processing to the host gpu.
+
+\subsubsection{Device Operation: Configure mouse cursor}
+
+The mouse cursor image is a normal resource, except that it must be
+64x64 in size. The driver MUST create and populate the resource
+(using the usual VIRTIO_GPU_CMD_RESOURCE_CREATE_2D,
+VIRTIO_GPU_CMD_RESOURCE_ATTACH_BACKING and
+VIRTIO_GPU_CMD_TRANSFER_TO_HOST_2D controlq commands) and make sure they
+are completed (using VIRTIO_GPU_FLAG_FENCE).
+
+Then VIRTIO_GPU_CMD_UPDATE_CURSOR can be sent to the cursorq to set
+the pointer shape and position. To move the pointer without updating
+the shape use VIRTIO_GPU_CMD_MOVE_CURSOR instead.
+
+\subsubsection{Device Operation: Request header}\label{sec:Device Types / GPU
Device / Device Operation / Device Operation: Request header}
+
+\begin{lstlisting}
+enum virtio_gpu_ctrl_type {
+
+ /* 2d commands */
+ VIRTIO_GPU_CMD_GET_DISPLAY_INFO = 0x0100,
+ VIRTIO_GPU_CMD_RESOURCE_CREATE_2D,
+ VIRTIO_GPU_CMD_RESOURCE_UNREF,
+ VIRTIO_GPU_CMD_SET_SCANOUT,
+ VIRTIO_GPU_CMD_RESOURCE_FLUSH,
+ VIRTIO_GPU_CMD_TRANSFER_TO_HOST_2D,
+ VIRTIO_GPU_CMD_RESOURCE_ATTACH_BACKING,
+ VIRTIO_GPU_CMD_RESOURCE_DETACH_BACKING,
+
+ /* cursor commands */
+ VIRTIO_GPU_CMD_UPDATE_CURSOR = 0x0300,
+ VIRTIO_GPU_CMD_MOVE_CURSOR,
+
+ /* success responses */
+ VIRTIO_GPU_RESP_OK_NODATA = 0x1100,
+ VIRTIO_GPU_RESP_OK_DISPLAY_INFO,
+
+ /* error responses */
+ VIRTIO_GPU_RESP_ERR_UNSPEC = 0x1200,
+ VIRTIO_GPU_RESP_ERR_OUT_OF_MEMORY,
+ VIRTIO_GPU_RESP_ERR_INVALID_SCANOUT_ID,
+ VIRTIO_GPU_RESP_ERR_INVALID_RESOURCE_ID,
+ VIRTIO_GPU_RESP_ERR_INVALID_CONTEXT_ID,
+ VIRTIO_GPU_RESP_ERR_INVALID_PARAMETER,
+};
+
+#define VIRTIO_GPU_FLAG_FENCE (1 << 0)
+
+struct virtio_gpu_ctrl_hdr {
+ le32 type;
+ le32 flags;
+ le64 fence_id;
+ le32 ctx_id;
+ le32 padding;
+};
+\end{lstlisting}
+
+All requests and responses on the virt queues have the fixed header
+\field{struct virtio_gpu_ctrl_hdr}.
+
+\begin{description}
+\item[\field{type}] specifies the type of the driver request
+ (VIRTIO_GPU_CMD_*) or device response (VIRTIO_GPU_RESP_*).
+\item[\field{flags}] request / response flags.
+\item[\field{fence_id}] If the driver sets the VIRTIO_GPU_FLAG_FENCE
+ bit in the request \field{flags} field the device MUST:
+ \begin{itemize*}
+ \item set VIRTIO_GPU_FLAG_FENCE bit in the response,
+ \item copy the content of the \field{fence_id} field from the
+ request to the response, and
+ \item send the response only after command processing is complete.
+ \end{itemize*}
+\item[\field{ctx_id}] Rendering context (used in 3D mode only).
+\end{description}
+
+On success the device will return VIRTIO_GPU_RESP_OK_NODATA in
+case there is no payload. Otherwise the \field{type} field will
+indicate the kind of payload.
+
+On error the device will return one of the
+VIRTIO_GPU_RESP_ERR_* error codes.
+
+\subsubsection{Device Operation: controlq}\label{sec:Device Types / GPU Device
/ Device Operation / Device Operation: controlq}
+
+For any coordinates given 0,0 is top left, larger x moves right,
+larger y moves down.
+
+\begin{description}
+
+\item[VIRTIO_GPU_CMD_GET_DISPLAY_INFO] Retrieve the current output
+ configuration. No request data (just bare \field{struct
+ virtio_gpu_ctrl_hdr}). Response type is
+ VIRTIO_GPU_RESP_OK_DISPLAY_INFO, response data is \field{struct
+ virtio_gpu_resp_display_info}.
+
+\begin{lstlisting}
+#define VIRTIO_GPU_MAX_SCANOUTS 16
+
+struct virtio_gpu_rect {
+ le32 x;
+ le32 y;
+ le32 width;
+ le32 height;
+};
+
+struct virtio_gpu_resp_display_info {
+ struct virtio_gpu_ctrl_hdr hdr;
+ struct virtio_gpu_display_one {
+ struct virtio_gpu_rect r;
+ le32 enabled;
+ le32 flags;
+ } pmodes[VIRTIO_GPU_MAX_SCANOUTS];
+};
+\end{lstlisting}
+
+The response contains a list of per-scanout information. The info
+contains whether the scanout is enabled and what its preferred
+position and size is.
+
+The size (fields \field{width} and \field{height}) is similar to the
+native panel resolution in EDID display information, except that in
+the virtual machine case the size can change when the host window
+representing the guest display is gets resized.
+
+The position (fields \field{x} and \field{y}) describe how the
+displays are arranged (i.e. which is -- for example -- the left
+display).
+
+The \field{enabled} field is set when the user enabled the display.
+It is roughly the same as the connected state of a phyiscal display
+connector.
+
+\item[VIRTIO_GPU_CMD_RESOURCE_CREATE_2D] Create a 2D resource on the
+ host. Request data is \field{struct virtio_gpu_resource_create_2d}.
+ Response type is VIRTIO_GPU_RESP_OK_NODATA.
+
+\begin{lstlisting}
+enum virtio_gpu_formats {
+ VIRTIO_GPU_FORMAT_B8G8R8A8_UNORM = 1,
+ VIRTIO_GPU_FORMAT_B8G8R8X8_UNORM = 2,
+ VIRTIO_GPU_FORMAT_A8R8G8B8_UNORM = 3,
+ VIRTIO_GPU_FORMAT_X8R8G8B8_UNORM = 4,
+
+ VIRTIO_GPU_FORMAT_R8G8B8A8_UNORM = 67,
+ VIRTIO_GPU_FORMAT_X8B8G8R8_UNORM = 68,
+
+ VIRTIO_GPU_FORMAT_A8B8G8R8_UNORM = 121,
+ VIRTIO_GPU_FORMAT_R8G8B8X8_UNORM = 134,
+};
+
+struct virtio_gpu_resource_create_2d {
+ struct virtio_gpu_ctrl_hdr hdr;
+ le32 resource_id;
+ le32 format;
+ le32 width;
+ le32 height;
+};
+\end{lstlisting}
+
+This creates a 2D resource on the host with the specified width,
+height and format. The resource ids are generated by the guest.
+
+\item[VIRTIO_GPU_CMD_RESOURCE_UNREF] Destroy a resource. Request data
+ is \field{struct virtio_gpu_resource_unref}. Response type is
+ VIRTIO_GPU_RESP_OK_NODATA.
+
+\begin{lstlisting}
+struct virtio_gpu_resource_unref {
+ struct virtio_gpu_ctrl_hdr hdr;
+ le32 resource_id;
+ le32 padding;
+};
+\end{lstlisting}
+
+This informs the host that a resource is no longer required by the
+guest.
+
+\item[VIRTIO_GPU_CMD_SET_SCANOUT] Set the scanout parameters for a
+ single output. Request data is \field{struct
+ virtio_gpu_set_scanout}. Response type is
+ VIRTIO_GPU_RESP_OK_NODATA.
+
+\begin{lstlisting}
+struct virtio_gpu_set_scanout {
+ struct virtio_gpu_ctrl_hdr hdr;
+ struct virtio_gpu_rect r;
+ le32 scanout_id;
+ le32 resource_id;
+};
+\end{lstlisting}
+
+This sets the scanout parameters for a single scanout. The resource_id
+is the resource to be scanned out from, along with a rectangle.
+
+Scanout rectangles must be completely covered by the underlying
+resource. Overlapping (or identical) scanouts are allowed, typical
+use case is screen mirroring.
+
+The driver can use resource_id = 0 to disable a scanout.
+
+\item[VIRTIO_GPU_CMD_RESOURCE_FLUSH] Flush a scanout resource Request
+ data is \field{struct virtio_gpu_resource_flush}. Response type is
+ VIRTIO_GPU_RESP_OK_NODATA.
+
+\begin{lstlisting}
+struct virtio_gpu_resource_flush {
+ struct virtio_gpu_ctrl_hdr hdr;
+ struct virtio_gpu_rect r;
+ le32 resource_id;
+ le32 padding;
+};
+\end{lstlisting}
+
+This flushes a resource to screen. It takes a rectangle and a
+resource id, and flushes any scanouts the resource is being used on.
+
+\item[VIRTIO_GPU_CMD_TRANSFER_TO_HOST_2D] Transfer from guest memory
+ to host resource. Request data is \field{struct
+ virtio_gpu_transfer_to_host_2d}. Response type is
+ VIRTIO_GPU_RESP_OK_NODATA.
+
+\begin{lstlisting}
+struct virtio_gpu_transfer_to_host_2d {
+ struct virtio_gpu_ctrl_hdr hdr;
+ struct virtio_gpu_rect r;
+ le64 offset;
+ le32 resource_id;
+ le32 padding;
+};
+\end{lstlisting}
+
+This takes a resource id along with an destination offset into the
+resource, and a box to transfer to the host backing for the resource.
+
+\item[VIRTIO_GPU_CMD_RESOURCE_ATTACH_BACKING] Assign backing pages to
+ a resource. Request data is \field{struct
+ virtio_gpu_resource_attach_backing}, followed by \field{struct
+ virtio_gpu_mem_entry} entries. Response type is
+ VIRTIO_GPU_RESP_OK_NODATA.
+
+\begin{lstlisting}
+struct virtio_gpu_resource_attach_backing {
+ struct virtio_gpu_ctrl_hdr hdr;
+ le32 resource_id;
+ le32 nr_entries;
+};
+
+struct virtio_gpu_mem_entry {
+ le64 addr;
+ le32 length;
+ le32 padding;
+};
+\end{lstlisting}
+
+This assign an array of guest pages as the backing store for a
+resource. These pages are then used for the transfer operations for
+that resource from that point on.
+
+\item[VIRTIO_GPU_CMD_RESOURCE_DETACH_BACKING] Detach backing pages
+ from a resource. Request data is \field{struct
+ virtio_gpu_resource_detach_backing}. Response type is
+ VIRTIO_GPU_RESP_OK_NODATA.
+
+\begin{lstlisting}
+struct virtio_gpu_resource_detach_backing {
+ struct virtio_gpu_ctrl_hdr hdr;
+ le32 resource_id;
+ le32 padding;
+};
+\end{lstlisting}
+
+This detaches any backing pages from a resource, to be used in case of
+guest swapping or object destruction.
+
+\end{description}
+
+\subsubsection{Device Operation: cursorq}\label{sec:Device Types / GPU Device
/ Device Operation / Device Operation: cursorq}
+
+Both cursorq commands use the same command struct.
+
+\begin{lstlisting}
+struct virtio_gpu_cursor_pos {
+ le32 scanout_id;
+ le32 x;
+ le32 y;
+ le32 padding;
+};
+
+struct virtio_gpu_update_cursor {
+ struct virtio_gpu_ctrl_hdr hdr;
+ struct virtio_gpu_cursor_pos pos;
+ le32 resource_id;
+ le32 hot_x;
+ le32 hot_y;
+ le32 padding;
+};
+\end{lstlisting}
+
+\begin{description}
+
+\item[VIRTIO_GPU_CMD_UPDATE_CURSOR]
+Update cursor.
+Request data is \field{struct virtio_gpu_update_cursor}.
+Response type is VIRTIO_GPU_RESP_OK_NODATA.
+
+Full cursor update. Cursor will be loaded from the specified
+\field{resource_id} and will be moved to \field{pos}. The driver must
+transfer the cursor into the resource beforehand (using control queue
+commands) and make sure the commands to fill the resource are actually
+processed (using fencing).
+
+\item[VIRTIO_GPU_CMD_MOVE_CURSOR]
+Move cursor.
+Request data is \field{struct virtio_gpu_update_cursor}.
+Response type is VIRTIO_GPU_RESP_OK_NODATA.
+
+Move cursor to the place specified in \field{pos}. The other fields
+are not used and will be ignored by the device.
+
+\end{description}
+
+\subsection{VGA Compatibility}\label{sec:Device Types / GPU Device / VGA
Compatibility}
+
+Applies to Virtio Over PCI only. The GPU device can come with and
+without VGA compatibility. The PCI class should be DISPLAY_VGA if VGA
+compatibility is present and DISPLAY_OTHER otherwise.
+
+VGA compatibility: PCI region 0 has the linear framebuffer, standard
+vga registers are present. Configuring a scanout
+(VIRTIO_GPU_CMD_SET_SCANOUT) switches the device from vga
+compatibility mode into native virtio mode. A reset switches it back
+into vga compatibility mode.
+
+Note: qemu implementation also provides bochs dispi interface io ports
+and mmio bar at pci region 1 and is therefore fully compatible with
+the qemu stdvga (see
\href{http://git.qemu-project.org/?p=qemu.git;a=blob;f=docs/specs/standard-vga.txt;hb=HEAD}{docs/specs/standard-vga.txt}
in the qemu source tree).
--
2.9.3
---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscr...@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-h...@lists.oasis-open.org
