> > 1. Both the device and the driver submit requests to each other. For each > > request the response is sent as a separate request. > > To be more precise, in vdec there are no responses. The guest sends > commands to the host using one virtqueue. The host signals > asynchronous events, which might not have the exact earlier guest > request associated to them.
How do you report errors? Is there an error event for that? > An example of such special case could be > H.264 framebuffer reordering, where one might end up with a few decode > requests not resulting in any frames being output and then one decode > request that would trigger multiple accumulated frames to be returned. Note: this can be done with a request/response model too, by simply completing the decode request when there is frame data, so in that case multiple decode requests simply complete at the same time. Yes, you can have multiple outstanding requests in virtio. Out-of-order completion is also allowed btw. > > 2. No support for getting/setting video stream parameters. For example > > (decoder): output format (NV12, I420), so the driver cannot really select > > the > > output format after headers have been parsed. > > Getting video stream parameters is there, but they are currently left > fully in control of the host video decoder. Ability to select between > multiple possible formats could be worth adding, though. Nice to see you agree on that one ;) > > 3. No support for getting plane requirements from the device (sg vs contig, > > size, stride alignment, plane count). > > There is actually a bigger difference that results in that. Vdec > assumes host-allocated buffers coming from a different device, e.g. > virtio-gpu and the host having the right knowledge to allocate the > buffers correctly. This is related to the fact that it's generally > difficult to convey all the allocation constraints in a generic > manner. Yep, buffer handling is tricky, especially when it comes to decoding directly to gpu buffers and also when supporting playback of drm-protected streams where the guest might not be allowed to access the stream data. > > 5. Decoder only: new devices will be needed to support encoder, processor or > > capture. Currently input is always a bitstream, output is always a video > > frame. No way set input format (needed for encoder, see 2). > > The rationale for this was that this is a point of contact with the > host and a possible attack surface, so having a protocol as specific > as possible makes the attack surface smaller and is easier to validate > in the device implementation. I think it certainly makes sense to support both video encoding and video decoding with a single device spec. For capture (especially camera) and processor things are less clear, although there is at least some overlap too. IIRC most of the spec is "TBD" for those anyway, so I'd suggest to drop them from the spec for now and focus on the video parts. cheers, Gerd --------------------------------------------------------------------- To unsubscribe, e-mail: virtio-dev-unsubscr...@lists.oasis-open.org For additional commands, e-mail: virtio-dev-h...@lists.oasis-open.org
