virtio-spi is a virtual SPI master and it allows a guset to operate and
use the physical SPI master controlled by the host.
This patch adds the specification for virtio-spi.
Signed-off-by: Haixu Cui <quic_haix...@quicinc.com>
---
device-types/spi/description.tex | 191 ++++++++++++++++++++++++
device-types/spi/device-conformance.tex | 7 +
device-types/spi/driver-conformance.tex | 7 +
3 files changed, 205 insertions(+)
create mode 100644 device-types/spi/description.tex
create mode 100644 device-types/spi/device-conformance.tex
create mode 100644 device-types/spi/driver-conformance.tex
diff --git a/device-types/spi/description.tex b/device-types/spi/description.tex
new file mode 100644
index 0000000..c35826b
--- /dev/null
+++ b/device-types/spi/description.tex
@@ -0,0 +1,191 @@
+\section{SPI Master Device}\label{sec:Device Types / SPI Master Device}
+
+virtio-spi is a virtual SPI (Serial Peripheral Interface) master and it allows
+a guest to operate and use the physical SPI master controlled by the host.
+
+virtio-spi has a single virtqueue. SPI transfer requests are placed into
+the virtqueue, and serviced by the physical SPI master.
+
+In a typical host and guest architecture with virtio-spi, Virtio SPI driver is
+the front-end existing in the guest kernel, and Virtio SPI device acts as the
+back-end in the host platform.
+
+\subsection{Device ID}\label{sec:Device Types / SPI Master Device / Device ID}
+45
+
+\subsection{Virtqueues}\label{sec:Device Types / SPI Master Device /
Virtqueues}
+
+\begin{description}
+\item[0] requestq
+\end{description}
+
+\subsection{Feature bits}\label{sec:Device Types / SPI Master Device / Feature
bits}
+
+None
+
+\subsection{Device configuration layout}\label{sec:Device Types / SPI Master
Device / Device configuration layout}
+
+All fields of this configuration are always available and read-only for Virtio
SPI driver.
+
+\begin{lstlisting}
+struct virtio_spi_config {
+ le32 bus_num;
+ le32 chip_select_max_number;
+};
+\end{lstlisting}
+
+The \field{bus_num} indicates the physical SPI master assigned to guset, and
this is SOC-specific.
+
+The \field{chip_select_max_number} is the maximum number of chipselect the
physical SPI master supports.
+
+\subsection{Device Initialization}\label{sec:Device Types / SPI Master Device
/ Device Initialization}
+
+\begin{enumerate}
+\item The Virtio SPI driver configures and initializes the virtqueue.
+\end{enumerate}
+
+\subsection{Device Operation}\label{sec:Device Types / SPI Master Device /
Device Operation}
+
+\subsubsection{Device Operation: Request Queue}\label{sec:Device Types / SPI
Master Device / Device Operation: Request Queue}
+
+Virtio SPI driver enqueues requests to the virtqueue, and they are used by
+Virtio SPI device. Each request represents one SPI tranfer and is of the form:
+
+\begin{lstlisting}
+struct virtio_spi_transfer_head {
+ u8 slave_id;
+ u8 bits_per_word;
+ u8 cs_change;
+ u8 tx_nbits;
+ u8 rx_nbits;
+ le32 mode;
+ le32 freq;
+ le32 word_delay_ns;
+ le32 cs_setup_ns;
+ le32 cs_delay_hold_ns;
+ le32 cs_change_delay_inactive_ns;
+};
+\end{lstlisting}
+
+\begin{lstlisting}
+struct virtio_spi_transfer_result {
+ u8 result;
+};
+\end{lstlisting}
+
+\begin{lstlisting}
+struct virtio_spi_transfer_req {
+ struct virtio_spi_transfer_head head;
+ u8 tx_buf[];
+ u8 rx_buf[];
+ struct virtio_spi_transfer_result result;
+};
+\end{lstlisting}
+
+The \field{slave_id} indicates the chipselect index the SPI transfer used.
+
+The \field{bits_per_word} indicates the number of bits in each SPI transfer
word.
+
+The \field{cs_change} indicates whether to deselect device before starting the
+next SPI transfer, 0 means chipselect keep asserted and 1 means chipselect
deasserted
+then asserted again.
+
+The \field{tx_nbits} indicates bus width for write transfer:
+ 0,1: bus width is 1, also known as SINGLE;
+ 2 : bus width is 2, also known as DUAL;
+ 4 : bus width is 4, also known as QUAD;
+ 8 : bus width is 8, also known as OCTAL;
+ other values are invalid.
+
+The \field{rx_nbits} indicates bus width for read transfer:
+ 0,1: bus width is 1, also known as SINGLE;
+ 2 : bus width is 2, also known as DUAL;
+ 4 : bus width is 4, also known as QUAD;
+ 8 : bus width is 8, also known as OCTAL;
+ other values are invalid.
+
+The \field{mode} indicates how data is clocked out and in. Bit definitions as
follows:
+ bit 0: CPHA, determines the timing (i.e. phase) of the data bits
+ relative to the clock pulses.
+ bit 1: CPOL, determines the polarity of the clock.
+ bit 2: CS_HIGH, if 1, chipselect active high, else active low.
+ bit 3: LSB_FIRST, determines per-word bits-on-wire, if 0, MSB
+ first, else LSB first.
+ bit 4: LOOP, if 1, device is in loopback mode, else normal mode.
+
+The \field{freq} indicates the SPI transfer speed in Hz.
+
+The \field{word_delay_ns} indicates delay to be inserted between consecutive
+words of a transfer, in ns unit.
+
+The \field{cs_setup_ns} indicates delay to be introduced after chipselect
+is asserted, in ns unit.
+
+The \field{cs_delay_hold_ns} indicates delay to be introduced before chipselect
+is deasserted, in ns unit.
+
+The \field{cs_change_delay_inactive_ns} indicates delay to be introduced after
+chipselect is deasserted and before next asserted, in ns unit.
+
+The \field{tx_buf} is the buffer for data sent to the device.
+
+The \field{rx_buf} is the buffer for data received to the device.
+
+The final \field{result} is the transfer result, either VIRTIO_SPI_TRANS_OK
for success
+or VIRTIO_SPI_TRANS_ERR for error.
+
+\begin{lstlisting}
+#define VIRTIO_SPI_TRANS_OK 0
+#define VIRTIO_SPI_TRANS_ERR 1
+\end{lstlisting}
+
+\subsubsection{Device Operation: Operation Status}\label{sec:Device Types /
SPI Master Device / Device Operation: Operation Status}
+
+Fields in structure \field{virtio_spi_transfer_head} are written by Virtio SPI
driver, while
+\field{result} in structure \field{virtio_spi_transfer_result} is written by
Virtio SPI device.
+
+virtio-spi supports three transfer types:
+ 1) half-duplex read;
+ 2) half-duplex write;
+ 3) full-duplex read and write.
+
+For half-duplex read transfer, \field{rx_buf} is filled by Virtio SPI device
and consumed
+by Virtio SPI driver. For half-duplex write transfer, \field{tx_buf} is filled
by Virtio
+SPI driver and consumed by Virtio SPI device. And for full-duplex read and
write transfer,
+both \field{tx_buf} and \field{rx_buf} are used.
+
+\drivernormative{\subsubsection}{Device Operation}{Device Types / SPI Master
Device / Device Operation}
+
+The Virtio SPI driver MUST send transfer requests on the requestq virtqueue.
+
+Fields in structure \field{virtio_spi_transfer_head} MUST be filled by Virtio
SPI driver
+and MUST be readable for Virtio SPI device.
+
+Structure \field{virtio_spi_transfer_result} MUST be filled by Virtio SPI
device
+and MUST be writable for Virtio SPI device.
+
+For half-duplex read, Virtio SPI driver MUST send structure
\field{virtio_spi_transfer_head},
+\field{rx_buf} and structure \field{virtio_spi_transfer_result} to SPI Virtio
Device in order.
+
+For half-duplex write, Virtio SPI driver MUST send structure
\field{virtio_spi_transfer_head},
+\field{tx_buf} and structure \field{virtio_spi_transfer_result} to SPI Virtio
Device in order.
+
+For full-duplex read and write, Virtio SPI driver MUST send structure
\field{virtio_spi_transfer_head},
+\field{tx_buf}, \field{rx_buf} and structure
\field{virtio_spi_transfer_result} to SPI Virtio Device in order.
+
+For half-duplex write or full-duplex read and write transfer, Virtio SPI
driver MUST not use \field{rx_buf}
+if the \field{result} returned from Virtio SPI device is VIRTIO_SPI_TRANS_ERR.
+
+\devicenormative{\subsubsection}{Device Operation}{Device Types / SPI Master
Device / Device Operation}
+
+Virtio SPI device MUST set all the fields of the structure
\field{virtio_spi_config} before
+they are read by Virtio SPI driver.
+
+Virtio SPI device MUST set the structure \field{virtio_spi_transfer_result}
before sending
+it back to Virtio SPI driver.
+
+Virtio SPI device MUST be able to identify the transfer type according to the
received
+virtqueue descriptors.
+
+Virtio SPI device MUST NOT change the data in \field{tx_buf} if transfer type
is half-duplex write
+or full-duplex read and write.
diff --git a/device-types/spi/device-conformance.tex
b/device-types/spi/device-conformance.tex
new file mode 100644
index 0000000..3e771bc
--- /dev/null
+++ b/device-types/spi/device-conformance.tex
@@ -0,0 +1,7 @@
+\conformance{\subsection}{SPI Master Device Conformance}\label{sec:Conformance
/ Device Conformance / SPI Master Device Conformance}
+
+An SPI Master device MUST conform to the following normative statements:
+
+\begin{itemize}
+\item \ref{devicenormative:Device Types / SPI Master Device / Device Operation}
+\end{itemize}
diff --git a/device-types/spi/driver-conformance.tex
b/device-types/spi/driver-conformance.tex
new file mode 100644
index 0000000..3c965ef
--- /dev/null
+++ b/device-types/spi/driver-conformance.tex
@@ -0,0 +1,7 @@
+\conformance{\subsection}{SPI Master Driver Conformance}\label{sec:Conformance
/ Driver Conformance / SPI Master Driver Conformance}
+
+An SPI Master driver MUST conform to the following normative statements:
+
+\begin{itemize}
+\item \ref{drivernormative:Device Types / SPI Master Device / Device Operation}
+\end{itemize}
--
2.17.1
---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscr...@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-h...@lists.oasis-open.org
