---
content.tex | 34 ++++++++++++++++++++++++++++++++--
1 file changed, 32 insertions(+), 2 deletions(-)
diff --git a/content.tex b/content.tex
index 0a62dce..3d656b5 100644
--- a/content.tex
+++ b/content.tex
@@ -49,6 +49,9 @@ \section{\field{Device Status} Field}\label{sec:Basic
Facilities of a Virtio Dev
\item[DEVICE_NEEDS_RESET (64)] Indicates that the device has experienced
an error from which it can't recover.
+
+\item[SUSPEND (16)] When VIRTIO_F_SUSPEND is negotiated, indicates that the
+ device has been suspended by the driver.
\end{description}
The \field{device status} field starts out as 0, and is reinitialized to 0 by
@@ -73,6 +76,10 @@ \section{\field{Device Status} Field}\label{sec:Basic
Facilities of a Virtio Dev
recover by issuing a reset.
\end{note}
+The driver SHOULD NOT set SUSPEND if FEATURES_OK is not set.
+
+When setting SUSPEND, the driver MUST re-read \field{device status} to ensure
the SUSPEND bit is set.
+
\devicenormative{\subsection}{Device Status Field}{Basic Facilities of a
Virtio Device / Device Status Field}
The device MUST NOT consume buffers or send any used buffer
@@ -82,6 +89,25 @@ \section{\field{Device Status} Field}\label{sec:Basic
Facilities of a Virtio Dev
that a reset is needed. If DRIVER_OK is set, after it sets
DEVICE_NEEDS_RESET, the device
MUST send a device configuration change notification to the driver.
+The device MUST ignore SUSPEND if FEATURES_OK is not set.
+
+The device MUST ignore SUSPEND if VIRTIO_F_SUSPEND is not negotiated.
+
+The device SHOULD allow settings to \field{device status} even when SUSPEND is
set.
+
+If VIRTIO_F_SUSPEND is negotiated and SUSPEND is set, the device SHOULD clear
SUSPEND
+and resumes operation upon DRIVER_OK.
+
+If VIRTIO_F_SUSPEND is negotiated, when the driver sets SUSPEND,
+the device SHOULD perform the following actions before presenting SUSPEND bit
in the \field{device status}:
+
+\begin{itemize}
+\item Stop consuming buffers of any virtqueues and mark all finished
descriptors as used.
+\item Wait until all descriptors that being processed to finish and mark them
as used.
+\item Flush all used buffer and send used buffer notifications to the driver.
+\item Pause its operation except \field{device status} and preserve
configurations in its Device Configuration Space, see \ref{sec:Basic Facilities
of a Virtio Device / Device Configuration Space}
+\end{itemize}
+
\section{Feature Bits}\label{sec:Basic Facilities of a Virtio Device /
Feature Bits}
Each virtio device offers all the features it understands. During
@@ -99,10 +125,10 @@ \section{Feature Bits}\label{sec:Basic Facilities of a
Virtio Device / Feature B
\begin{description}
\item[0 to 23, and 50 to 127] Feature bits for the specific device type
-\item[24 to 41] Feature bits reserved for extensions to the queue and
+\item[24 to 42] Feature bits reserved for extensions to the queue and
feature negotiation mechanisms
-\item[42 to 49, and 128 and above] Feature bits reserved for future extensions.
+\item[43 to 49, and 128 and above] Feature bits reserved for future extensions.
\end{description}
\begin{note}
@@ -872,6 +898,10 @@ \chapter{Reserved Feature Bits}\label{sec:Reserved Feature
Bits}
\ref{devicenormative:Basic Facilities of a Virtio Device / Feature
Bits} for
handling features reserved for future use.
+ \item[VIRTIO_F_SUSPEND(42)] This feature indicates that the driver can
+ SUSPEND the device.
+ See \ref{sec:Basic Facilities of a Virtio Device / Device Status Field}.
+
\end{description}
\drivernormative{\section}{Reserved Feature Bits}{Reserved Feature Bits}
--
2.35.3
