On Tue, Sep 16, 2025 at 10:29 PM Jonathan Vasquez <[email protected]> wrote: > I wanted to update you on my progress on this. After some discussion with > Corvin, I was able to use some of his insights to finally get it working :). > There was only one thing that was off with my configuration that was causing > it not to work at all, and that's that the "Resize BAR Support" option was > enabled in my UEFI. Apparently FreeBSD doesn't support Resizable BAR and if > this is enabled, then we won't know what will happen exactly if the host or > the bhyve VM decides to resize the bar. After I turned that off, everything > worked! I've done a full update of my instructions on how to get this working > and I've also generated a new set of screenshots of multiple different games > and benchmarks. Let me know your thoughts. I'm not familiar with Resize BAR, > but my BIOS mentioned that it's to allow you "take full advantage of the GPUs > memory", I'm guessing that there may be a significant performance drop due to > this being disabled, but the performance is already pretty good. I was > getting 40 fps pretty much consistently in Cyberpunk 2077 on Ray Tracing Low > on 2560x1440p. The Heaven Benchmarks were getting 100-300 fps depending on > the scene on DX11, Ultra Quality, Extreme Tessellation. Furmark also yielded > 194-208 (avg: 201) fps for its 1440p benchmark test. This was all through RDP. > (..)
Sounds really great! Would it be possible Jonathan that you put all the instructions and hints into the Handbook so it is all on one place info and up to date? :-) -- CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
