On Thu, Apr 30, 2020 at 06:28:21AM -0400, Michael S. Tsirkin wrote:
> On Thu, Apr 30, 2020 at 11:14:10AM +0100, Stefan Hajnoczi wrote:
> > On Thu, Apr 30, 2020 at 10:43:23AM +0200, Stefano Garzarella wrote:
> > > On Wed, Apr 29, 2020 at 05:53:45PM +0100, Stefan Hajnoczi wrote:
> > > > A userspace process holding a file descriptor to a virtio_blk device can
> > > > still invoke block_device_operations after hot unplug. This leads to a
> > > > use-after-free accessing vblk->vdev in virtblk_getgeo() when
> > > > ioctl(HDIO_GETGEO) is invoked:
> > > >
> > > > BUG: unable to handle kernel NULL pointer dereference at
> > > > 0000000000000090
> > > > IP: [<ffffffffc00e5450>]
> > > > virtio_check_driver_offered_feature+0x10/0x90 [virtio]
> > > > PGD 800000003a92f067 PUD 3a930067 PMD 0
> > > > Oops: 0000 [#1] SMP
> > > > CPU: 0 PID: 1310 Comm: hdio-getgeo Tainted: G OE
> > > > ------------ 3.10.0-1062.el7.x86_64 #1
> > > > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
> > > > rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
> > > > task: ffff9be5fbfb8000 ti: ffff9be5fa890000 task.ti: ffff9be5fa890000
> > > > RIP: 0010:[<ffffffffc00e5450>] [<ffffffffc00e5450>]
> > > > virtio_check_driver_offered_feature+0x10/0x90 [virtio]
> > > > RSP: 0018:ffff9be5fa893dc8 EFLAGS: 00010246
> > > > RAX: ffff9be5fc3f3400 RBX: ffff9be5fa893e30 RCX: 0000000000000000
> > > > RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff9be5fbc10b40
> > > > RBP: ffff9be5fa893dc8 R08: 0000000000000301 R09: 0000000000000301
> > > > R10: 0000000000000000 R11: 0000000000000000 R12: ffff9be5fdc24680
> > > > R13: ffff9be5fbc10b40 R14: ffff9be5fbc10480 R15: 0000000000000000
> > > > FS: 00007f1bfb968740(0000) GS:ffff9be5ffc00000(0000)
> > > > knlGS:0000000000000000
> > > > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > > CR2: 0000000000000090 CR3: 000000003a894000 CR4: 0000000000360ff0
> > > > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > > > DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> > > > Call Trace:
> > > > [<ffffffffc016ac37>] virtblk_getgeo+0x47/0x110 [virtio_blk]
> > > > [<ffffffff8d3f200d>] ? handle_mm_fault+0x39d/0x9b0
> > > > [<ffffffff8d561265>] blkdev_ioctl+0x1f5/0xa20
> > > > [<ffffffff8d488771>] block_ioctl+0x41/0x50
> > > > [<ffffffff8d45d9e0>] do_vfs_ioctl+0x3a0/0x5a0
> > > > [<ffffffff8d45dc81>] SyS_ioctl+0xa1/0xc0
> > > >
> > > > A related problem is that virtblk_remove() leaks the vd_index_ida index
> > > > when something still holds a reference to vblk->disk during hot unplug.
> > > > This causes virtio-blk device names to be lost (vda, vdb, etc).
> > > >
> > > > Fix these issues by protecting vblk->vdev with a mutex and reference
> > > > counting vblk so the vd_index_ida index can be removed in all cases.
> > > >
> > > > Fixes: 48e4043d4529523cbc7fa8dd745bd8e2c45ce1d3
> > > > ("virtio: add virtio disk geometry feature")
> > > > Reported-by: Lance Digby <ldi...@redhat.com>
> > > > Signed-off-by: Stefan Hajnoczi <stefa...@redhat.com>
> > > > ---
> > > > drivers/block/virtio_blk.c | 87 ++++++++++++++++++++++++++++++++++----
> > > > 1 file changed, 79 insertions(+), 8 deletions(-)
> > > >
> > > > diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
> > > > index 93468b7c6701..6f7f277495f4 100644
> > > > --- a/drivers/block/virtio_blk.c
> > > > +++ b/drivers/block/virtio_blk.c
> > > > @@ -33,6 +33,16 @@ struct virtio_blk_vq {
> > > > } ____cacheline_aligned_in_smp;
> > > >
> > > > struct virtio_blk {
> > > > + /*
> > > > + * vdev may be accessed without taking this mutex in blk-mq and
> > > > + * virtqueue code paths because virtblk_remove() stops them
> > > > before vdev
> > > > + * is freed.
> > > > + *
> > > > + * Everything else must hold this mutex when accessing vdev and
> > > > must
> > > > + * handle the case where vdev is NULL after virtblk_remove()
> > > > has been
> > > > + * called.
> > > > + */
> > > > + struct mutex vdev_mutex;
> > >
> > > The patch LGTM, I'm just worried about cache_type_store() and
> > > cache_type_show() because IIUC they aren't in blk-mq and virtqueue code
> > > paths, but they use vdev.
> > >
> > > Do we have to take the mutex there too?
> >
> > No, because del_gendisk() in virtblk_remove() deletes the sysfs
> > attributes before vblk->vdev is set to NULL. kernfs deactivates the
> > kernfs nodes so that further read()/write() operations fail with ENODEV
> > (see fs/kernfs/dir.c and fs/kernfs/file.c).
Thanks for the clarification!
> >
> > I have tested that a userspace process with a sysfs attr file open
> > cannot access the attribute after virtblk_remove().
Great!
> >
> > Stefan
>
> Sounds good, but pls update the comment adding something like
> " .. or anything coming from block layer since del_gendisk()
> in virtblk_remove deletes the disk before vblk->vdev is set to NULL.
> "
With the comment fixed:
Reviewed-by: Stefano Garzarella <sgarz...@redhat.com>
Thanks,
Stefano
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
